Scientific Lab. Equipments-> Sterilization-> Autoclaves

[1]   Click to Enlarge Dressing Drums (Shallow Sterilizer) Seamless made of S.S. Bearing ISI Mark IS:3831 Dressing Drums are made of Stainless Steel sheet by deep draw process & confirm to ISI specifications. These are ideal for sterilization of Gauges, Dressing Cotton, Gloves, surgical instruments used in operation theatres and emergency wards. Sizes ? 225 ? 225 mm ? 275 ? 240 mm ? 275 ? 130 mm ? 350 ? 240 mm ? 350 ? 130 mm See Enlarge Click to Enlarge Portable Autoclave Suitable of general laboratory use as well as for field sterilization of instruments and dressings etc. Dome shaped S.S. lid is provided which seals the autoclave with neoprene jointless gasket. The lid is tightened to the body when closed. The working pressure is 1.1 to 1.2 Kg./cm2 (15-18PSI). The sterilizer is made of S.S. Sheet deep drawn to cylindrical shape. The seamless construction allow no bacteria residue & free from dirt accumulation. It is equipped with dial pressure gauge 0-60 PSI, spring loaded safety valve, dead weight type safely valve and steam release valve. The load is held in dressing drums (optional), which is supported on a stand (tripod) the autoclave is hydraulically tested at twice the working pressure as per ISI requirement. It is fitted with ISI marked heater. Supplied complete with plug & cord. Suitable to work on 220/230 Volt, single phase, 50 Hz, AC supply. Size • 350 × 300-325 mm Optional Accessories • Dressing Drum See Enlarge Click to Enlarge Autoclave (Vertical) High pressure, electrically heated vertical steam sterilizer is used for sterilization of surgical instruments, dressing material, linen, rubber, plastic material by means of saturated steam under pressure of 15 to 20 psi. (adjustable) Apart from health services it is also used in scientific research institutions and universities.Sturdy double walled construction with boiler/inner chamber made of stainless steel of 18 SWG sheet. Outer shell is made of mild steel finished with powder coated paint. The boiler and outer shell is provided with air insulation. Lid is made of stainless steel plate and is tightened all-around by wing nuts. Moulded, jointless gaskets are made of Neoprene rubber. Sterilizer is hydraulically tested upto 40 psi.Autoclaves are fitted with water level arrangements to indicate water position inside the boiler, pressure gauge, Air/steam release cock, spring loaded safety valve which can be set at any selected point from 10 psi. to 20 psi ? 3 psi. and drain. ISI marked immersion type heating element heats the water and steam to desired temperature and pressure.Supplied complete with S.S. basket, cord and plug to work on 220 Volts, 50 cycles AC supply. Available in following chamber sizes dia ? depth load 250 ? 450 mm 1.5 kw 300 ? 500 mm 2.0 kw 350 ? 550 mm 3.0 kw 400 ? 600 mm 4.0 kw 450 ? 600 mm 4.0 kw 550 ? 750 mm 5.0 kw See Enlarge Click to Enlarge H.P. Sterilizer High pressure electrically heated vertical steam sterilizer used for sterilizing of surgical instruments, dressing material, linen, rubber, plastic material, injection liquids by means of steam under pressure of 15 to 20 psi. (adjustable). Construction :– Triple chamber with inner chamber and steam jacket made of thick stainless steel. Jacket is insulated by high grade glass wool to minimise the temperature loss. All sterilizers are hydraulically tested upto 2.5 times of working pressure. Outer chamber made of thick stainless steel sheet. Lid is made of thick stainless steel plate single piece and closed by wing nuts arrangement. Jointless neoprene gasket does not allow any leakage. Fitted with double safety valve, water level indicator, water inlet and drain valves. Supplied complete with cord and plug but without dressing bins. Suitable to work on 220 volts, 1 ph 50 Hz, Ac supply. Available in following chamber sizes :– dia × depth load 300 × 500 mm 2 kw 400 × 600 mm 4 kw   Optional Accessories :– • Automatic low water level cutoff device • Pressure control switch • Dressing Bins (a) 275 × 225 mm (11" × 9") For size (a) (b) 375 × 275 mm (15" × 11") For size (b) See Enlarge Click to Enlarge H.P. Cylindrical Sterilizer ? Vertical The Unit comprises of steam jacket electrically heated, inner chamber & lid made of stainless steel, works on 3-phase, 440V., A/C, 50 HZ supply fitted with automatic pressure control switch, safety valve etc. Chamber :– The chamber is made of heavy gauge, stainless steel, fitted with stainless steel forged ring and forged lid, chamber is fitted with two safety valve of stainless steel, pressure gauge, water outlet valve and Air inlet valve, stainless steel steam condenser, tube with stainless steel eject valve. Steam Generator :– The steam generator is made out of stainless steel heavy gauge fitted with pressure gauge and water draining valve. Outer Cover :– The outer cover is made out of stainless steel, duly insulated with high density mineral wool from the inner chamber and fitted with stable legs. Principle :– The steam generates from the jacket and gets condensed by the help of the eject valve which goes through condensing tube and the dry steam gets into the chamber to penetrate into the packs contained in the chamber. Available in following capacities :– dia × depth load 300 × 500 mm 4 kw 400 × 600 mm 6 kw Spare accessories Pressure gauge/compound gauge Water level gauge glass Wings nuts for vertical autoclave Neoprene Rubber jointless gaskets Dia : 250mm, 300mm, 350mm, 400mm, 450mm, 550mm Heating elements : “L” type (Vertical Autoclave) 1.5 Kw, 2.0 Kw, 3.0 Kw, 4.0 Kw See Enlarge Click to Enlarge H.P. Cylindrical, Horizontal Sterilizer Introduction The sterilizer is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through. All models work on the principle of downward displacement of air which is the most economical method of obtaining sterilization. Robust and rigid construction, designed for all types of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical Institutions. Suitable for Sterilizing hospital dressings, linen, rubber, plastic goods, surgical instruments, glasswares, utensils etc. Construction Triple walled with steam jacket and separate boiler Inner chamber and steam jacket are made up of Heavy gauge S.S. Sheet with leak proof argon-arc welding. The sterilizer has single piece door made of stainless steel. Back plate and ring is also made of thick stainless steel sheet. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure. Mounted on tubular steel frame with ground levelling screwed flanges. The Outer jacket is wrapped with asbestos sheet or glass wool to minimise the heat losses due to radiation and is covered by polished stainless steel sheet for that elegant appearance. Steam Generator Made of heavy stainless steel sheet. Heavy ring mounted in front of the boiler with folding thick stainless steel plate is fitted with heating elements and low water level cutoff device to protect the former from burning out dry. Front folding plate system provides for easy cleaning of the deposited scale on the elements and the walls for long life and efficiency. Fitted with water gauge glass for water level indication, water inlet and outlet valves. Pressure Control The “PIEZOSTAT” (Pressure control device) is incorporated in all electrically operated sterilizers. It economises on power consumption and reduces the frequent opening of the steam release valve and thus prevents the release of steam in the room, It cuts off the power supply to heaters when the set pressure is achieved and re-energises the heating elements when pressure falls below the set point. Heating Elements Flanged type, immersion heating elements are made of high grade material and duly ISI marked. Safety Door Sterilizer has hinged self-locking single piece thick S.S. plate door and cannot be opened when under pressure. The self-locking device automatically disengages the thread mechanism when the sterilizer is under pressure to preclude any eventuality of accident. Single Point Control Complete sterilizing cycle is controlled from one point with the help of “Multiport Valve” fitted at front top. Two speeds of steam exhaust are available; fast and slow. Easily readable jacket and chamber pressure on gauges mounted on the multi port valve. A moisture trap is fitted in the chamber discharge line to absorb the condensate automatically to prevent moistening of the subject matter to be sterilized. Switch Box Houses the PIEZOSTAT, main switch, pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation. Other Features TRIPLE SAFETY :– The Sterilizer is provided with the triple safety features. At the boiler level by a PIEZOSTAT which automatically limits the pressure to the required set value and a spring loaded safety valve in case of its failure which releases the steam to keep pressure within the safety limits. At the chamber level, a spring loaded safety valve and a dead weight release valve to release the steam in case the pressure exceeds the safety limit. All these safety features function independent of one another and sequentially i.e. one takes over the charge in case of other’s failure. A plug screen prevents the discharge line from choking. The plug is easily removable for daily cleaning. Powerful Ejector for drying sterilized linen circulates air throughout the chamber. The circulating air passes through a corrosion resistant metallic wool filter. A dial thermometer is provided to show the chamber temperature. Automatic Vacuum breaker is provided to break vacuum in case of formation of vacuum due to steam condensation. Operating Temp. & Pressure Sterilizing Temp : 120°C Sterilizing pressure : 1.2 to 1.5 kg/cm2 (15 psi to 22psi) Power Requirement : Suitable to operate on 440V volts, 3 ph, 50 Hz, Ac supply Available in following capacities dia × depth load 400 × 600 mm 6 kw 400 × 1100 mm 9 kw 500 × 900 mm 9 kw 500 × 1200 mm 9 kw Optional Accessories • Chamber/Jacket of S.S. 316 • Door of S.S. 304/316 • Dressing Drums • Direct steam supply from centralised boiler • Temperature recorder • High pressure High vacuum model • Additional door (Double door) model. • Fully automatic micro processor controlled model Spare Accessories Pressure gauge/Compound gauge Water level gauge glass Dial thermometer Non return valve Moisture trap Jointless Gasket :– Neoprene/silicon rubber, size 400mm & 500mm Heating elements (Flange Type) Rating kw 6.0, 9.0 See Enlarge Click to Enlarge Ethylene Oxide Sterilizer Ethylene Oxide Sterilizer suitable for sterilization of Catheters Disposable. The unit is made out of stainless steel 304 chambers. Stainless steel back plate as well as S.S./M.S. door. The unit is having individual valves for exhaust, allowing gas in the chamber and for vacuumising. The unit is having vacuum pump, chamber heating and control system. Table top model suitable for 2 Nos. Sterilizing Baskets. The unit is having facia panel. All accessories pump etc. are enclosed with stainless steel cover. Gauges and controls are provided in the facia panel. This model is specially designed for Hospitals and Research Lab. The unit is suitable for 10 : 90 EO : CO2 or 12 : 88 EO : F–12 mixture. Table top model are having following sizes • Cylindrical Model 300 mm (Dia) × 500 mm (Depth) 450 mm (Dia) × 450 mm (Depth) • Rectangular Model 250 (H) × 300 (W) × 550 (D) mm. 250 (H) × 300 (W) × 800 (D) mm. See Enlarge Click to Enlarge Ethylene Oxide Sterilizer Free standing bulk model Suitable for large Hospitals & for small manufacturing units. Suitable for 10/90 EO/CO2 mixture or 90/10 EO/CO2. ? Cylindrical Model 400 Dia ? 600 mm 500 Dia ? 1200 mm ? Rectangular Model 600 (H) ? 600 (W) ? 1200 (D) mm. 900 (H) ? 600 (W) ? 1500 (D) mm. Other sizes on request. See Enlarge Click to Enlarge H.P. High Speed Cylindrical Horizontal Sterilizer Details are as per YSI-405, but size 400 mm dia ? 600 mm depth. It is fitted with 18 KW electric heaters to finish the sterilization within 6 minutes of achieving the desired pressure of 2.2 kg/CM2 and corresponding saturated steam temperature of 134? C. Primarily it is intended for emergency sterilization of unwrapped surgical instruments and other components. Supplied complete with cord and plug to operate on 440 volts, three phase, 50 Hz AC supply. Capacity dia ? depth load 400 ? 600 mm 18 k See Enlarge Click to Enlarge H.P. Rectangular Horizontal Sterilizer Introduction The sterilizer is based on the principle that microbiological action of saturated steam at elevated temp is rapid and thorough. All models work on downward displacement of air principle which is most economical method of obtaining for all types of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical institutes. Suitable for sterilizing hospital dressings, linen, rubber plastic goods, surgical instruments, glasswares and utensils etc. Construction Robust and rugged all weld construction which is leak proof unlike riveted construction. Inner chamber is made of thick plate of Mild Steel of non magnetic stainless steel of 304/316 quality and jacket is made out of rolled steel. Sterilizers will have single door made out of rolled steel lined with S.S. sheet on both sides. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure. The steam jacket is lined on the outer side with asbestos sheet or glass wool which prevent heat losses due to radiation and is covered by strong rolled steel sheet duly painted. Boiler Made of thick stainless steel plate suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacement/repair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. This device protects the heater in the generator from burning out dry. The steam pressure in the boiler is indicated on a individual pressure gauge. Safety Lock for Door Every horizontal rectangular sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened when the chamber is under pressure. The clutch mechanism automatically disengages the threads of the radial locking system for precluding any eventuality of accident when the chamber is under pressure. A heat resistant Neoprene Rubber gasket ensure steam tight fitting. Pressure Control Electrically operated “PIEZOSTAT” (Pressure Control Device) is incorporated in all electrically operated sterilizers. It economises power consumption and limits the use of release valve which would frequently blow steam into the room. It cuts off the power supply to heaters when the set pressure is achieved and re-energises heaters when pressure falls down. Sterilization Complete sterilizing cycle is controlled from one point with the help of “Multi port valve” fitted at front top. Two speeds of exhaust are available for evacuating. The Chamber Two separate valves provided for evacuating air and steam from inner chamber and jacket as and when desired. A steam trap is fitted in the chamber discharge line to eliminate the condensate automatically. Switch Box Houses the Pressure control switch, Main switch, Pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation. Other Features TRIPLE SAFETY : The sterilizer is provided with triple safety. (a) By a pressure control switch which automatically limits the pressure to the required set valve. (b) Two spring loaded safety valves one each at chamber and boiler level. (c) A dead weight safety valve at chamber level. A PLUG SCREEN prevents the discharge line from choking. The plug is easily removable for routing cleaning. A powerful Ejector (for drying sterilized linen) circulates air through the chamber. The circulating air passes through a corrosion resistant metal wool filter. A Dial thermometer is provided to show the chamber temperature. AUTOMATIC VACUUM BREAKER is provided to break vacuum case of vacuum formation due to steam condensation. Operating Temperature and pressure :– • Sterilizing Temp. : 121°C. • Sterilizing Pressure : 1.2 to 1.5 kg/Cm2, (15 psi to 22 psi) Optional Accessories • Chamber/Jacket of S.S. 316 • Door of S.S. 304/316 • Additional Tray/Shelves • Carriage & Trolley • Direct steam supply from centralised boiler • Temperature recorder • High pressure High vacuum model • Additional door (Double door) model. • Fully automatic micro processor controlled model Spare Accessories Pressure gauge/Compound gauge Water level gauge glass Dial thermometer Non return valve Moisture trap Jointless Gasket :– Neoprene/silicon rubber, size : 400 & 500mm Heating elements (Flange Type) Rating kw 6.0, 9.0 Available in following capacities W × H × D load   (a) 600 mm × 600 mm × 1200 mm 18 kw Electrically Operated (b) 600 × 900 × 1500 36 kw Electrically Operated (c) 900 × 1050 × 2100   Steam Operated (d) 1050 × 1200 × 2100   Steam Operated See Enlarge Click to Enlarge Hot & Cold Water Sterilizer The unit is mounted on a study M.S. stand, consists two separate st. steel tank one is for sterile hot water and other is for sterile cold water. The unit consist of individual control such as safety valve, pressure gauge, steam trap, self sterilizing water filter, water level indicator, air filter and draw off water valve with socket. Each tank has individual heater bank, low water cut off pressure controller & contactor. The unit is made as per IS standards i.e. IS : 7455 (1974). Useful in operation theatres where quick sterile of hot water is required. See Enlarge Click to Enlarge Single Water Still (Distillation) Steri free standing electrically operated water still capable of producing Pyrogen free distilled water as per IP/BP standards. All contact parts are made of stainless steel, having immersion water heater, low water protection & electrical control box. Mounted on a sturdy MS tubular stand. Capacity :? 5 Lit/ hr, 10 Lit/hr, 20 Lit/hr, 40 Lit/hr, 60 Lit/hr. See Enlarge Click to Enlarge Aseptic Scrub Station Scrub Station made of complete 304 and high grade mat finish to maintain hygienic condition. Scientifically designed to ensure any stagnation of liquid for aseptic condition. The unit comes in 1,2 or 3 station for use and provided with elbow operated taps or can be operated by means of proximity detector which senses the presence and allows warm water to flow through solenoid valve. The water is stored in an in-built tank also made of S.S. having provision for fast warming which is controlled with the help of thermostat (which is supplied along with this unit). Flow / quantity of liquid soap / disinfectant is controlled with the help of foot switch. In case automatic controlled fails (e.g. electricity) elbow operated taps are provided for water and foot operated dispenser are provided for soap / disinfectant. Any other feature can be incorporated to meet users requirement Technical Specification Electric Supply : 230 V, Single ph. 50 Hz. Water Inlet Connection : ?? BSP Drain Connection : 2: BSP Available in following models One Station Two Station Three Station Optional Accessories ? 2 Micron Prefilteration ? Automatic Thermostatic Mixer ? UV Sterilization of water ? Complete Automisation. See Enlarge [1] Go to Top