| |
Click to Enlarge
|
Strain Measurement Module
This comprises of Cantilever Beam bounded with four strain gauges, pan and weights upto 1Kg. Digital 3? digit indicator module is supplied to read the micro strain. Specification: Cantilever Beam Capacity : 1kg
Beam Dimension : 300x28x2.5(LxBxT in mm)
Bridge Selection : Half & Full
Strain Gauge Resistance : 350 Ohms
Gauge Factor : 2 to 2.1
Dead Weights : 100 Grams x 10 Nos.
Indicator : 3? digit to read upto ? 1999 ? strain.
See Enlarge
|
|
|
|
Click to Enlarge
|
Displacement Measurement Module
This comprises of LVDT with micrometer jig fitted on the base plate to give displacement to the core of LVDT. Digital 3? digit indicator is supplied to read the displacement in mm. Specification: LVDT Range : ? 10mm
Micrometer : 0 - 25mm
Indicator : 3? digit to read upto ?10mm
See Enlarge
|
|
|
|
Click to Enlarge
|
Temperature Measurement Module
This comprises of thermocouple, RDT & thermistor to measure temperature upto 100 ?C, small heating source up to 100 ?C and digital temperature indicator is provided to read temperature. Specification: Temperature Range : 0 - 100?C
RTD : Pt - 100
Thermocouple : Fe / K (J-Type)
Thermistor : 5/10 K Ohms (NTC -Type)
Temperature Source : Electric Kettle
Source Measurement : Glass Bead Mercury Thermometer
Indicator : 3? digit display to read temperature
Thermocouple Trainer
RDT Trainer
Thermistor Trainer
See Enlarge
|
|
|
|
Click to Enlarge
|
Load Measurement Trainer
IT comprises of strain gauge based load cell loading arrangement to load in compression, weights and digital load indicator to read the load in Kg. Specification: Load cell : 1Kg capacity
Weight : 100 gms. x 10 nos.
Indicator : 3? digit display to read upto 1 Kg.
Resolution : 0.01 Kg.
See Enlarge
|
|
|
|
Click to Enlarge
|
Pressure Measurement Trainer
This comprises of strain gauge based pressure cell, foot pump to build the pressure tank fitted with release valves and a bourdon pressure gauge. Digital pressure indicator to read the pressure in Kg/Cm? is provided. Specification: Pressure Cell : 10Kg / Cm?
Pressure Source : Foot pump to build pressure upto 5Kg / Cm?
Indicator : 3? digit display to read upto 10 Kg / Cm?
Resolution : 0.1 Kg / Cm?
See Enlarge
|
|
|
|
Click to Enlarge
|
Torque Measurement Trainer
This comprises of strain gauge based reaction type torque transducer, fulcrum arm of 1M length, with L angle to mount the sensor, pan & weights with digital torque indicator to read the torque in Kg-m. Specification: Torque Cell : 1Kg-m capacity
Loading : L angle and 1 m length fulcrum arm
Weights : 100gms x 10 nos
Indicator : 3? digit display to read upto 1 Kg / Cm?
Resolution : 0.01 Kg / Cm?
See Enlarge
|
|
|
|
Click to Enlarge
|
Speed Measurement Trainer
This comprises of photo reflective & magnetic pickup sensors, fractional HP motor with speed regulator, tone wheels of 60 teeth fitted rigidly on a base with digital speed indicator. Specification: Speed Sensors : Photo reflective & Magnetic pickup
Motor : 12V FHP DC motor
Speed controller : Variable DC power supply 12V
Indicator : 4 digit display to read upto RPM (max)
See Enlarge
|
|
|
|
Click to Enlarge
|
Resistance Measurement Trainer
This comprises of potentiometer to vary the resistance with respect to the angular displacement with digital indicator to read the resistance change in the potentiometer. Specification: Resistance Source : 10 K Ohms single turn potentiometer
Angle of variation : 0 to 270?
Indicator : 3? digit display to read angular displacement
See Enlarge
|
|
|
|
Click to Enlarge
|
Piezoelectric Trainer
This comprises of piezoelectric crystal mounted inside housing and fitted on a plate. Digital indicator is supplied to indicate the impact force. Specification: Piezoelectric Transducer : 1000 Pf Piezo-crystal
Indicator : 3? digit display to read impact force.
See Enlarge
|
|
|
|
Click to Enlarge
|
Capacitance Trainer
This comprises of parallel plate / angular capacitor with dielectric medium air sensor, mounted on the base plated with scale for displacement. Digital indicator is provided to read the change in capacitance in terms of displacement. Specification: Capacitance Sensor : Parallel Plate capacitor for Linear Displacement and Angular displacement.
Displacement : 50mm / 90?
Indicator : 3? digit display to read displacement
See Enlarge
|
|
|
|
Click to Enlarge
|
Level Measurement Trainer
Level Trainer is a table top module, it comprises of a measuring tank of 50 cm length, sump tank and load cell or capacitance as level sensor. A vertical pump is fitted to circulate the water. Digital display indicator is provided to display water level in cm. Specification: Level Sensor : Load cell / capacitance
Max. Level : 50 cm
Pump : FHP vertical pump
Digital indicator : 3? digit LED display to read levels in cms.
See Enlarge
|
|
|
|
Click to Enlarge
|
Rotameter Trainer Module
The setup is a table top module, it comprises of source and measuring tank. The measuring tank is made of acrylic material with gradation marked in liters. A small FHP pump is fitted to circulate the water. A Rotameter with control valve is used to measure the flow rate. Digital timer is provided to note down the duration of flow and the volume of water is measured by the markings on the measuring tank to calculate the actual flow rate. Specification: Tank Capacity : Max. 5 liters
Rotameter : Acrylic / glass body floating dead weight type
Flow rate : 6 to 100 LPM
Pump : FHP vertical pump
Timer : 0 to 30 minutes digital timer
See Enlarge
|
|
|
|
Click to Enlarge
|
Inductance Trainer
This comprises of a coil wound on a bobbin in which a magnetic material core moves as sensor. The displacement of the core is measured and displayed through a digital indicator. Specification: Inductance sensor : Copper wire wound on hallow bobbin inside which a MS core moves.
Displacement : 20mm
Indicator : 3? digit display to read upto 20mm
See Enlarge
|
|
|
|
Click to Enlarge
|
Orifice Meter Trainer
This setup is a table top model, This comprises of source & measuring tank. The measuring tank is of acrylic with liters graduated. A small FHP pump is fitted to circulate the water. A orifice meter with U-tube manometer is provided to measure the flow rate. A rotameter is provided to measure the exact flow rate. Digital timer is provided to note down the duration of flow. Specification: Tank capacity : Max. 5 Liters
Rotameter : 6 to 100 LPM
Orifice Meter : Small orifice plate with ? BSP tube fitted with U-Tube manometer.
Flow Rate : 6 to 100 LPM
Pump : FHP vertical pump
Timer : 0 to 30 minutes digital timer Difference pressure sensor in U-type manometer with digital flow indicator at extra cost can be supplied
See Enlarge
|
|
|
|
Click to Enlarge
|
Current to Pressure Trainer
This setup comprises of a I to P converter fitted on a base. Two pressure gauges are fitted one at the input side and the other at the output of the I to P converter. A current source with digital display is provided to excite the I to P converter. A constant air supply should be provided to the system at 20 PSI pressure from a standard compressor. Specification: Air Input : 20 PSI constant air supply from a compressor
Air Output : 3 to 15 PSI
Current Source : 4 - 20 mA generator with digital display. Current variable through potentiometer.
Pressure Gauge : Bourdon type pressure gauge of 30 PSI range - 2 Nos.
Optional : Air compressor with air regulator to suit the requirement.
See Enlarge
|
|
|
|
