Logo
Educational tender items for schools in Malaysia
"AVAILABLE ISI STUDENT MICROSCOPE FOR NCERT KITS (UPSKL, SSK, SSLK BIOLOGY)"
 
Product Range
 
News Letter
All Fields are mandatory.
Your Name :
Country :
Your Email ID:
Security Code
 
   
 

Engineering, Polytechnic and Vocational Training Equipment-> Oscillators
 
[1]
 
OSCILLATORS. WEIN BRIDGE OSCILLATOR. MODEL IBL-WBO-1
Click to Enlarge
OSCILLATORS. WEIN BRIDGE OSCILLATOR. MODEL IBL-WBO-1

Wein Bridge, is one of the most commonly used audio-frequency oscillators. The Bridge has a Combination of Resistance R1 & Capacitance C1 is in parallel in the arm AD. The Combination of Resistance R2 & Capacitance C2 is in series in the adjoining arm AB. The arm DC consists of fixed Resistance R3.The arm BC consists of a variable Resistance R4. In this trainer you will measure the frequency of the oscillation using the formula F0=0.159/?R1R2C1C2.use of four

See Enlarge



RC PHASE SHIFT OSCILLATOR. MODEL IBL-PSO-1
Click to Enlarge
RC PHASE SHIFT OSCILLATOR. MODEL IBL-PSO-1

Phase Sift Oscillator is a sine wave generator. The cascaded phase shift network provides necessary feedback voltage required to enable the circuit oscillate in association with active components using either OP-AMP or transistor configuration. The frequency range depends on the values of RC components selected in the phase shift network. This trainer has all the active components like OP- AMP, and transistor, built-in power supplies, appropriate value of components, variable uncommitted potentiometer etc, to perform the experiment.

See Enlarge



TUNED COLLECTOR OSCILLATOR . MODEL IBL-TCO-1
Click to Enlarge
TUNED COLLECTOR OSCILLATOR . MODEL IBL-TCO-1

The function of an oscillator is to produce a sinusoidal wave shape of a specific frequency and amplitude. In doing so, the stability of an oscillator is very important. Depending on its application, an oscillator may be required to have either good frequency stability or amplitude stability; in many circumstances, both are required. In Series fed Tuned Collector Oscillator both the ac and dc components flow through the tank circuit. In Shunt fed Tuned Collector Oscillator the dc is blocked from the tank circuit and only the ac component flows in the tank circuit.

In this trainer the student measures the output frequency and amplitude by varying the capacitance of the tank circuit. This trainer has built in power supply, inductors, and active components to meet the above objective.


See Enlarge



HARTELY OSCILLATOR. MODEL IBL-HO-1
Click to Enlarge
HARTELY OSCILLATOR. MODEL IBL-HO-1

Hartley?s oscillator is intended for generation of high frequency signals like carrier wave signals in a communication system. This consists of a Tank circuit made up of an inductor and a fixed capacitor shunted by a voltage-variable capacitor network. Using this trainer the student experiments how variable frequency is generated. An external Oscilloscope of 15MHz is required for observation of the generated sine wave signals.

1. To connect a Hartley oscillator and observe and compare the collector and base Wave forms.

2. To check the frequency of the oscillator.


See Enlarge



COLPITT?S OSCILLATOR. MODEL IBL-CO-1
Click to Enlarge
COLPITT?S OSCILLATOR. MODEL IBL-CO-1

Colpitt?s Oscillator has fairly good frequency stability, can be used for wide frequency ranges and it is easy to tune. This is similar to Shunt-fed Hartely?s oscillator, except that two capacitors are used in the tank circuit instead of a tapped inductor. The frequency adjustment is possible both by varying the capacitor or inductor.

In this trainer a common-base Colpitt?s is used. There is no phase difference between the signal at the collector and the emitter signals. Therefore the phase of the feedback signal need not be changed. An external oscilloscope is required to view the generated signals.


See Enlarge



RELAXATION OSCILLATOR. MODEL IBL-RO-1
Click to Enlarge
RELAXATION OSCILLATOR. MODEL IBL-RO-1

Relaxation oscillator is a ramp generator. The ramp generator is often used as time base in sweep circuit in an Oscilloscope. The ramp generator has a good application in power electronics as control signal generation of thyristor pulse triggering circuits. Using this trainer the student can perform the measurements of various repetition rates of the oscillator. The device provides a pulse output at the B1 terminal for onward application of signal for pulse trigger circuits also.

This trainer has necessary power supplies, test points for observation of waveforms. An external oscilloscope is required to view the generated signals.


See Enlarge




[1]


 

 
 
 
Home|About Us|Products|Certificates|Enquiry|Feedback|FAQ's|Contact Us
Copyright © 2010 - International Biological Laboratories. All rights reserved.
Our Associated Websites
www.interlabs-India.com | www.interlabs.in | www.interlabs.co.in | www.ambalalab.com | www.interlabs.info | www.interlabs-has.com | www.best-visibility.com | www.vidyatechnoart.com | www.labs-glassware.com | www.v-pyrex.com | www.ncert-kits.com | www.shoppingbags.com | www.pharmaceuticalgiftsanatomicalmodels.com
 
myspace profile views counter