| |
Click to Enlarge
|
Digital Temperature Indicators
| MODEL : | 6100 | | Range : | 199.9, 600, 1200 OR 1600? | | Accuracy : | ? 0.5 % | | Signal Input : | TC, RTD, mV OR mA | | Input Supply : | 110 V AC, 220 V AC OR 12 V DC | | Size : | 96 ? 96mm, 72 ? 72mm, 96 ? 48mm |
See Enlarge
|
|
|
|
Click to Enlarge
|
Wall Mounted Digital Temperature Indicator With large Display
| MODEL : | 6100W | | Range : | 10.0 to 99.9?C | | Use PT- | 100RTD Sensor
25 mm, Display Height
Temperature visible from 10 Meters |
See Enlarge
|
|
|
|
Click to Enlarge
|
Hand Held Portable Digital Temperature Indicator
MODEL : 6160 Range:199.9, 1200?C Available with Surface, Immersion, Needle & Air Probe Use 4x1.5V penlite cells
See Enlarge
|
|
|
|
Click to Enlarge
|
Digital Temperature Controller
MODEL : 6215 Range : 199.9, 600 1200, 1600?C Single Set Point, Single Relay Accepts TC, RTD, mV or mA Inputs Size : 96X96mm
See Enlarge
|
|
|
|
Click to Enlarge
|
Dual Setting Digital Temperature Controller
MODEL : 6252 Range : 199.9, 600 1200, 1600?C Setting by 2 Nos. of 10-Turn Helical Potentiometers. 2 Relays Output For Alarm and Switching Accepts TC, RTD, mV or mA Inputs Size : 96X96mm
See Enlarge
|
|
|
|
Click to Enlarge
|
Multi Channel Temprature Indicator
MODEL : 6106 Range : 199.9, 600, 1200 or 1600?C Accuracy : 0.5% Input : TC or RTD No of Channel Available :6, 8, 10, 12 Size : 96x96mm or 96x192mm
See Enlarge
|
|
|
|
Click to Enlarge
|
Auto Temperature Scanner
MODEL : 6308 Range : 0-199.9, 600,1200, 1600?C Accuracy : ? 0.5 % F.S Mode : Auto/ Manual Selectable Input Power : 230 V or 110 V ? 10 % 50/60 Hzt 50 Hz Size : 96?96 mm Facia, 91?91 mm Cutout
See Enlarge
|
|
|
|
Click to Enlarge
|
Digital Temperature Dial Gauge
MODEL : 6001 Dial Gauge : 0-199.9?C For Pt 100 RTD, 0-300?C For J Type Types : Vertical or Horizontal Battery : Single 9V Battery Housing : MS Powder Coated Size : 96?96 mm
See Enlarge
|
|
|
|
Click to Enlarge
|
Digital Tachometer (Contact / Non Contact) Two-In- One
MODEL : CT-500
Measurement: A. Photo Tachometer Range : 20 RPM to 75,000 RPM
Distance : Operation from 50 mm to 150mm using a photo-reflective tape
Light : RED visible LED light B. Contact Tachometer Range : : 20 RPM to 25,000 RPM The upper speed is limited by error caused by rubber roller slippage >
Battery : : 4x1.5 V Penlite cells Accessories : Carrying Case- 1 pc.
RPM Adapter (Cone) - 2 pc.
RPM Adapter (Conical) - 1 pc.
Surface Speed Wheel - 1 pc.
(10 cm Circumference)
Operation Manual - 1pc.
Reflecting Tape - 1m
1.5V x 4 Pencil Cells
See Enlarge
|
|
|
|
Click to Enlarge
|
Microprocessor Based Digital Tachometer
MODEL : CT-200
Display: 4 Digit LED
Input: 1 pulse per revolution
Range: 20 to 75000 RPM
Accuracy: 0.01 % F.S.
Power Supply: 220 V AC
Sensor: Photo or Inductive
Size : Panel Mounting 96x96mm
See Enlarge
|
|
|
|
Click to Enlarge
|
Non Contact Tachometer
MODEL : CT-550
Display : 4 Digit LCD with Leading Zero Blanking.
Measurement :
Range : 20 RPM to 75,000 RPM (Resolution 1RPM upto 9,999 RPM)
Distance : Operating from 3 to 5 inch using a Photo-Reflective Sticker.
Light : Red Visible LED Light ( No Filament Bulb Used)
Power Supply : 4 Standard Pencil Cells.
Accuracy : 1 RPM ? 1 LSD Below 9,999 RPM &10 RPM ? 1 LSD Above 10,000 RPM
Operation Temperature : 0 - 50?C
Memory : Automatic when 'Measure' Button is Released
Sampling Time : 1 sec over 60 RPM
Circuit : Micro Controller Based LSI
Calibration : Referred to Quartz Crystal. Weight : approx. 300 grms
Size : 160 x 60 x 45 mm
See Enlarge
|
|
|
|
Click to Enlarge
|
Contact Tachometer
MODEL : CT-100
Display : Red 7 Seg LED
Resolution : 1 RPM
Range : 0-9,999 RPM
Accuracy : +/- 1 RPM
Operating Voltage : 6 V DC
Battery Required : 4 Nos 1015 Type (Pen Torch Cells)
Frequency Standard : Quartz Crystal
Gating Period : 1 sec.
Memory : Actuated by Touch Switch.
Battery : Low Inidication Provided Auto Shut off facility built-in.
Accessories : Male Female Rubber Centres
Rubber Disc to measure Surface Speed directly. Weight : approx 300 grms
See Enlarge
|
|
|
|
Click to Enlarge
|
Multi Range / Multi Function Timer
MODEL : 1052_2_DIGIT99SEC_MIN
Mode : Delay On or Delay Off User Selectable. Range
Model 1052 : 9.9 sec, 99 sec, 9.9 min, 99 min selectable.
Model 1053 : 99.9 sec, 999 sec, 99.9 min, 999 min
selectable.
Size : Size 96x96 mm, 72x72 mm
See Enlarge
|
|
|
|
Click to Enlarge
|
Repeat Cycle Timer
MODEL : 1072
Range
Model 1072 : 99 sec or 99 min. selectable
Model 1073 : 999 sec or 999 min. selectable
Size : 96x96 mm
See Enlarge
|
|
|
|
Click to Enlarge
|
4 Digit Timer
MODEL : 1054
Range : 9999 sec/min.
Mode : Delay On / Delay Off
Size : 96x96 mm
See Enlarge
|
|
|
|
