Hospital Instruments-> Respiratory Care

[1]   Click to Enlarge MEDICISER Respiratory exerciser (3 ball model) Helps to develop, improve and maintain respiratory fitness Useful in restoring and maintaining lung capacity of post operative ambulatory and COPD patients Improves respiratory parameters, maximal exercise capacity and overall cardiopulmonary status Air filter for enhanced protection Transparent, well calibrated chambers for accurate estimation of exercise capacity Soft, aesthetically coloured inspiratory tubing Colour coded triple ball design for proper visual feedback Sleek, stable design Sizes and technical specifications Ref./Art No. Packing inner/outer units 6040011 1/28 See Enlarge Click to Enlarge MEDIMASK Oxygen mask with tubing and nose clip Transparent OXYGEN MASK meant to administer oxygen to patients Made from special non-toxic medical grade PVC Two holes to allow carbon dioxide exhaled by the patient to escape Nasal clip for secure fixation over the patient’s nose Elastic band for placement around the head Transparent tubing to connect the mask to the oxygen source Sizes and technical specifications Ref./Art No. Size Packing inner/outer units 6010011 Adult 25/75 6010011 Paediatric 25/75 See Enlarge Click to Enlarge MEDIWIN Twin bore nasal oxygen set OXYGEN SET with nasal prongs for administering oxygen to the patient Two prongs in place of a normal mask to supply oxygen to the patient Soft extension tubing connecting the prongs to the oxygen pipeline Keeps the area around the nose free for other instrumentation Less leakage of oxygen as compared to the medimask Patient friendly design Sizes and technical specifications Ref./Art No Size Type Packing inner/outer units 6160011/6170011 Adult/Paed. Serrated tubing 25/200 6160021/6170021 Adult/Paed. Plain tubing 25/200 See Enlarge Click to Enlarge MEDIVENT ALPHA Air entrainment (venturi) mask Air entrainment mask for the supply of oxygen in varying concentration to the patients Two oxygen regulators, one (white) for higher concentration (35%, 40%, 50%) and the other (blue) for lower concentration (24%, 26%, 30%) for adjusting oxygen flow rate. Oxygen mask made from special non-toxic medical grade PVC material Oxygen mask is specially designed to comfortably fit on the patient’s face The mask is supplied with 150 cm long connecting tube, having internal serrations to prevent its collapse (STAR LUMEN) The tube has a funnel shaped connector at the proximal end to facilitate simple and safe connection with the oxygen source Supplied in non-sterile soft packing For single patient use Sizes and technical specifications Ref./ Art No. Product Product Packing inner/outer units 6030011 Medivent alpha (adult) 25/75 6030021 Medivent alpha (paediatric) 25/75 See Enlarge Click to Enlarge EASTNEB Nebuliser kit with face mask FACE MASK with an integrated NEBULIZER CHAMBER for nebulizing patients Transparent mask (with holes) made from non-toxic, medical grade PVC Nebuliser chamber (7ml) to house the drug in liquid form with a funnel shaped vent to allow oxygen at high flows to convert the liquid drug into droplet form to reach the lungs Soft, kink resistant, 180 cms long non-collapsible extension tubing (STAR LUMEN) to be connected with the oxygen source Sizes and technical specifications Ref./Art No Product Product Packing inner/outer units 6060011 Adult 20/60 6070011 Paediatric 20/60 See Enlarge Click to Enlarge MEDIEAL Endotracheal tube (Plain) Tubular device designed to be inserted into the trachea through the oral/nasal cavity to secure the airway and maintain the gas exchange in the lungs Made from non-toxic, clear, transparent, thermoresistant medical grade PVC (Polyvinyl Chloride) Fitted with standard 15 mm connector for attachments to all standard ventilatory circuits in operation theaters or intensive care units Graduated markings to display distance from the tip Well marked to indicate the internal/external diameter Nasoral tip suitable for both nasal and oral intubation Full length radio-opaque lines to assess position of the tube radiographically Murphy?s eye near the tip to circumvent any obstruction Disposable, sterile, non-pyrogenic Sizes and technical specifications Ref./Art No. (E.T. Tube with plain bevel I.D. (mm) Ref./Art No. (E.T. Tube with plain bevel I.D. (mm) Peel open Soft blister Peel open Soft blister 6190255 6190253 2.5 6190655 6190653 6.5 6190305 6190303 3.0 6190705 6190703 7.0 6190355 6190353 3.5 6190755 6190753 7.5 6190405 6190403 4.0 6190805 6190803 8.0 6190455 6190453 4.5 6190855 6190853 8.5 6190505 6190503 5.0 6190905 6190903 9.0 6190555 6190553 5.5 6190955 6190953 9.5 6190605 6190603 6.0 See Enlarge Click to Enlarge MEDIEAL ALPHA Endotracheal tube (cuffed) Tubular device designed to be inserted into the trachea through the mouth or nose to secure the airway and maintain the gas exchange in the lungs Made from non-toxic, clear, transparent, thermoresistant medical grade PVC (Polyvinyl Chloride) High volume, low pressure, evenly shaped cuff with a pilot balloon integrated to the tube for secure positioning inside the trachea Fitted with standard 15 mm connector for attachments to all standard ventilatory circuits in operation theaters or intensive care units Graduated markings to display distance from the tip Well marked to indicate the internal/external diameter Nasoral tip suitable for both nasal and oral intubation Full length radio-opaque lines to assess position of tube radiographically Murphy’s eye at the tip to circumvent any obstruction Disposable, sterile, non-pyrogenic Sizes and technical specifications Ref./Art No. (E.T. Tube with plain bevel I.D. (mm) Ref./Art No. (E.T. Tube with murphys’ eye Peel open Soft blister   Peel open Soft blister 6200605 6200603 6.0 6210605 6210603 6200655 6200653 6.5 6210655 6210653 6200705 6200703 7.0 6210705 6210703 6200755 6200753 7.5 6210755 6210753 6200805 6200803 8.0 6210805 6210803 6200855 6200853 8.5 6210855 6210853 6200905 6200903 9.0 6210905 6210903 6200955 6200953 9.5 6210955 6210953 See Enlarge [1] Go to Top