Scientific Lab. Equipments-> Waste Disposable (Incinerator)

[1]   Click to Enlarge Incinerator These Incinerators are very useful to destroy the infectious waste material generated at health-care facilities. These are of double wall construction, duly insulated with high efficiency ceramic wool/bricks. Heating elements are of special design and are made from Kenthal/Nichrome wire. Separate doors are provided for waste burning chamber & for ash collecting tray. A chimney is provided for emission of fumes. The chamber temperature is controlled by solid state digital temperature controller cum indicator. Thermistor controlled electrical system disengages itself after the temperature inside the chamber reaches the set temperature, which is around 700–900°C, and there after heat is generated by burning of wastes due to exothermic during process. This assists in saving electrical energy. Easy to install & operate and extremely durable equipment. Available in varied capacity/sizes based on the requirement of Nursing Homes, Hospitals etc. Capacity 3 Kg/Hr,5 Kg/Hr,10 Kg/Hr,15 Kg/Hr,25 Kg/Hr. Optional Accessories • Emission chimney per running ft. • Dilution Process System • Foul Odor Treatment System • Gravity settler See Enlarge Click to Enlarge Water Bath & Paraffin Wax Bath Spencers paraffin wax bath is double walled in construction. Interior made of stainless Steel and outer of Galvanized sheet duly finished with epoxy paint. Thick spintex wool insulation is provided on sides and bottom. The top cover has 11 holes to accommodate 6 pots of 63mm dia and 65mm deep 2 pots of 120mm dia and 65mm deep 4 holes of 25mm dia and 65mm deep for glass tubes. The temperature ranges from 5 degrees C above ambient to 100 degrees C. Thermostatically controlled with an accuracy of +_ 0.5 degrees C. Size : 375x300x150mm. Various Models of Paraffin wax bath are available depending upon end user requirements WATER BATH RECTANGULAR (Single walled) : Spencers single walled water bath made of Stainless Steel. Heating elements have an cut off device when the bath gets dry. Thermostatically controlled with an accuracy of +_ 0.5 degrees C. electrically operated on 220/230 volts A.C. Size: 1110-SWB-001 300 x 250 x 100mm with 6 holes of 75mm. 1110-SWB-002 330 x 300 x 100mm with 9 holes of 75mm. 1110-SWB-003 355 x 405 x 100mm with 12 holes of 75mm. WATER BATH RECTANGULAR (Double walled) : Spencers water bath represents an ideal combination of practical applicability, distinctive technology and modern design. They are commonly used in the fields of biochemistry, applied chemistry, biology and microbiology. Features: Double walled with thick polyurethane insulation. Thermostatically controlled with an accuracy of +_ 0.5 degrees C. Durable Stainless Steel interiors aids in maintaining temperature and makes cleaning easy. Outer is made of Galvanized sheet finished with epoxy paint. Immersion heating elements is made up of high grade material fitted at bottom. CONSTANT TEMPERATURE REFRIGERATED BATH : Spencers water baths are conceived for the most demanding applications. They are maintenance free and are suitable for prolonged testing. They are commonly used in the fields of Biochemistry, biology , Microbilogy etc. Size 500x250x250mm. Features: Temperature ranges from +5 degrees C to 90 degrees C. The temperature below ambient is controlled with specially designed in built refrigeration system of bath. Thermostatically controlled with an accuracy of +_ 0.5 degrees C. Fitted with stirrer and speed regulator. Inner and outer chamber made of Stainless Steel. Excellent temperature stability and control. Work on 220/230 volts AC. See Enlarge [1] Go to Top