These laboratory rectifiers are mainly used in electrical engineering laboratories for the purpose of conducting experiments in machines and DC circuits. This provides constant DC output. This provides 15A output for continuous operation. This rectifier provides suitable source for operating DC machines or any DC circuit. Suitable fuse protection is provided. The analog panel meters mounted on the front panel can monitor the output voltage and the current. This has a START and STOP push buttons. When start button is pressed, the DC voltage is available at the output terminals, as indicted by the meter reading. When stop button is pressed the output is reset to zero. In the event of mains power failure or accidental break in the mains supply, the DC supply from this rectifier unit, is automatically disconnected. The output from this rectifier is available to the DC circuit, only when the mains power returns AND, the voltage setting Variac is brought to 0V position AND start push button is pressed. This facility provides the scope for investigating the reason for the failure, and also protecting the assets. Specifications: - Input : 230 V AC single phase
- Output : 230 V DC continuously variable from 0 to 230V with suitable START
- Interlock.
- Capacitry : 15A
- Meter : Voltmeter and current meter indicators.
- Switches : START and STOP switches.
- Output control : DC Mains ON/OFF switch.
NOTE: You must connect ELCBs, earth connections, fuse switch gear, all other protective methods must be implemented, wherever required. |
