This setup is intended to measure low pressure gauges. The manometer is the metering device in this case, while the pressure gauge whose pressure is to be calibrated is used as DEVICE UNDER TEST (DUT). The manometer uses water for the measurement of pressure to be applied to the DUT. Note: The same setup can also be used to calibrate pressure transmitters. The transmitter is not in the scope of supply. This is an optional pressure transmitter Specifications:- - Manometer: Suitable U-Tube manometer supplied for low pressure measurements
- Pressure gauge: Low pressure gauge supplied as DUT.
Optional Interface:- - Low Pressure Transmitter: Low pressure measurement
- Input : 0 to 5PSI
- Output: 4-20Ma
- Necessary electronics is included in the setup
|
