This is a 30MHz Dual Trace Dual Channel Oscilloscope that is ideal for professionals as well as students undergoing technical studies. It is rugged, lightweight instrument that features a bright, sharply defined trace on a 80mm by 100mm cathode ray tube. It is best used for colleges, laboratories and for R & D sections. The low noise vertical system supplies calibrated deflection factors from 5mV to 10V per division at full bandwidth. Stable triggering is achieved over the full bandwidth of the vertical system. The flexibility and high sensitivity of the trigger system provides a range of conveniences such as automatic mode, normal trigger mode, independent selection of TV field triggering and single sweep triggering. The internal trigger signal is ac coupled. An external triggering signal or an external Z -axis modulation signal can be applied via a front panel or rear panel connector and the source selector switch. The horizontal system provides calibration sweep speeds from 0.2s to 0.1 Micro S per division. For greater measurement accuracy a x5 magnifier circuit extends the maximum sweep speed to 20 ns per division. The instrument is supplied with operator's manual, two signal probes and a power cord. In case if required then service manual can also be provided. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges. |