Engineering, Polytechnic and Vocational Training Equipment-> Process Control Equipments

1 [2] 3 4 [«Back ||Next »]   Click to Enlarge Microprocessor Timer MODEL : 1504 Range : 999.9 sec, min or hrs Selectable Mode : Delay On / Delay Off Selectable Size : 96x96 mm See Enlarge Click to Enlarge Blind Timers MODEL : 1002 Range : 99 sec or 99 min.selectable Mode : Delay On / Delay Off Size : 96x48 mm See Enlarge Click to Enlarge Blind Timers MODEL : 1003 Range : 999 sec or 999 min.selectable Mode : Delay On / Delay Off Size : 96x48 mm See Enlarge Click to Enlarge 6 Digit Event Counter MODEL : 246 Range : 999999 COUNTS Mode : Reset Push Button Sensor Input : Photo, Inductive & Micro Switch Available with battery backup Size : 96 x 48 mm See Enlarge Click to Enlarge Digital Preset Counter MODEL : 254 Range : 9999 COUNTS Mode : Preset With Thumb Wheel Switches Available with battery backup Auto or Manual operation Size : 96 x 96 mm , 72 x 72 mm See Enlarge Click to Enlarge Digital Preset Counter MODEL : 256 Range : 999999 COUNTS Mode : Preset With Thumb Wheel Switches Available with battery backup Auto or Manual operation Sensor Input : Photo, Inductive & Micro Switch Size : 96 x 96 mm See Enlarge Click to Enlarge Microprocessor Programmable Counter MODEL : 2500 Dual Set Point, Dual Relay, Range : 999999 Counts Resolution : 0.1, 0.01 or 0.001 Selectable. Multiplication Factor : 0.001 to 999.999 Selectable. Mode : Up / Down Counting with batch counting & totaliser Auto manual mode< Bulit in Memory backup Sensor Input : Photo, Inductive & Micro Switch Size : 72 x 72 mm See Enlarge Click to Enlarge Digital Conductivity Controller MODEL : 110C Display : 1999 Counts Cell Constant : 0.1 and 1 Set Points : 2 High and Low Transmission : Output 0 - 2.0 V DC Range : 199.9 ?s, 1999 ?s, 19.99 ms,199.9 ms Temperature Compensation : Automatic Using External PT-100 Sensor.. Size : 96x96 mm See Enlarge Click to Enlarge Digital Conductivity Indicator MODEL : 5500 Display : 3 ? Digit 13mm High, RED LED Cell Factor : 1.0 & 0.1 Selectable. Conductivity Range: A)For Cell Factor 1.0 1) 199.9 ?s/cm 2) 1999 ?s/cm 3) 19.99 mS/cm 4) 199.9 mS/cm B) For Cell Factor 0.1 1) 19.99 ?s/cm 2) 199.9 ?s/cm 3) 1999 ?s/cm 4) 19.99 mS/cm TDS Range : 2000 ppm Temperature Compensation : Automatic Using External PT-100 Sensor. Size : 96x96 mm See Enlarge Click to Enlarge Conductivity Transmitter MODEL : 1004 Blind Type : Wall / DIN Rail mounted Output : 4 - 20 mA Non Isolated Auto Temperature Compensation Supply : 220 V AC See Enlarge Click to Enlarge Digital pH Controller MODEL : 100pH Display : 3 1/2 Digit LCD 12.5 mm Range : 0.00 - 14.00 pH Auto Temp Compensation : 0 - 100 ?C With PT 100 Sensor Set Limits : 2 High and Low Alarm Limits : 2 High Hi and Low Lo Transmitter : 4 - 20 mA Isolated Accuracy : 0.5% ? 1 Digit Input Impedence : > 10?? OHMS Calibration : : pH 4 and pH7 See Enlarge Click to Enlarge Digital pH Controller MODEL : 110pH Display : 3 1/2 Digit LCD 12.5 mm Range : 0.00 - 14.00 pH Auto Temp Compensation : 0 - 100 ?C With PT 100 Sensor Set Limits : 2 High and Low Transmitter : 4 - 20 mA Isolated Accuracy : 0.5% ? 1 Digit Input Impedence : > 10?? OHMS Calibration : : pH 4 and pH7 See Enlarge Click to Enlarge Digital pH Controller MODEL : 150pH Display : 3? Digit LCD 12.5 mm Range : 0.00 - 14.00 pH Auto Temp Compensation : 0-100?C with PT 100 Sensor Set Limits : 0 - 14.00 pH Alarm Limts : Band type Alarm equally above / below set limit. Accuracy : 0.5% ?1 Digit. Input Impedence : > 10?? Ohms. Relay Outputs : 110V/220V AC @ 5 Amp. Transmitter Output : 4-20mA Isolated Calibration : Standard pH 7.00, Slope pH 4.00 Supply : 110/220V AC ? 10% Size : 96mm x 96mm See Enlarge Click to Enlarge pH Transmitter MODEL : 1001 Blind type Wall/ DIN Rail mounted Output : 4 - 20 mA Non Isolated See Enlarge Click to Enlarge pH Transmitter MODEL : 1002A Blind type Wall/DIN Rail mounted Output : 4 - 20 mA Isolated See Enlarge 1 [2] 3 4 [«Back ||Next »] Go to Top