Water Stills(Glass & Quartz)

[1] 2 [ Next»]   Click to Enlarge Borosilicate Glass Stills (EasyStill Mark 4 XL) The New "Interlabs Easystill ES-Mark 4 XL" provides high quality distilled water and incorporates several new & advanced safety features with additional wall mounting brackets. Gate valve to prevent water wastage Flow switch for boiler safety Thermostat for overheat protection Fuse for safety Features: Built-in Safety controls Abundant Output Efficient Condenser High quality distillate Powder coated stand Features : Built-in Safety Controls: The unit has built-in safety incorporating the latest features, such as, oGate Valve, which shuts off incase of power supply failure, thus preventing water wastage oFlow switch, which is provided for boiler safety. It shuts off power supply to the heater, in case of water supply failure. oThermostat: The heater is provided with thermostat for overheat protection. oFuse is provided for safety in case of voltage fluctuations and short circuit. oAdditional On/Off switch with Water failure indicator lamp. Abundant output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium-plated heater, housed in a horizontal Glass boiler. Efficient Condenser: The distilled output is cool ensured by a high efficiency coiled condenser. Temp. of distillate is 25-400C tested at ambient room temperature of 300C High quality distillate: The distillate obtained is of high quality with low conductivity and is pyrogen free. Screw thread connectors: are provided for easy plumbing and installation and to avoid the danger of glassware breakage during assembly Powder coated stand: For long, rust free operation. Teflon drain cock: For easy cleaning of the boiler. Specifications : Parameters Values Output 4 lit/hr Distilled water Quality Reagent Grade III Conductivity(using raw water) 3.0-4.0 x 10-6S/cm Conductivity(using treated water) 1.5-2.0 x 10-6S/cm PH 5.5 - 6.0 Distillate Quality Pyrogen free Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase,3 KW heater Cooling water reqd 1-2 lit/min Min. Pr. 3 p.s.i Dimensions (w x d x l) 500 x 200 x 600 (mm) Nett. Weight 6 kgs (app.) See Enlarge Click to Enlarge Borosilicate Glass Stills (PURE-HIT Q STILL ) The new improved Interlabs Pure Hit Q Stills are made from Borosilicate glass (Pyrex glass) manufactured with a host of advanced safety features for Laboratory use. Features : Abundant Output: The still provides 4 lit/hr of high quality distillate by a 3KW Silica heater housed in a horizontal borosilicate glass boiler. Distillate output is cool ensured by a high efficiency condenser. Dual overheat protection and safety with Pressure Temperature Switch (PTS) for Boiler and condenser. Level Sensor: For Automatic Operation and Reservoir level control. Additional provision for wall mounting. Silica sheathed heating element. Specifications : Parameters Values Output 4 lit/hr Distilled water Quality - Conductivity 1.0 - 2.0 X 10-6S/cm Resistivity 0.5 - 1.0 Megohm-cm PH Not specified for high purity water Distillate Quality Pyrogen free** Temperature 25 - 35oC Electrical Power 220/240 Volts, 50 - 60 Hz, 3 KW Single Phase Cooling water reqd (min.) 1 lit/min Min. Pr. 3 p.s.i Dimensions (w x d x l) 56 x 16 x 43 (cm) Weight 7.5 kgs (app) See Enlarge Click to Enlarge Borosilicate Glass Stills (PURE-HIT STILL) Interlabs Pure Hit Stills are designed for reliable continuous operation incorporating a host of features unmatched by comparable stills. It is easy to use, safe to clean, thoroughly reliable and above all low cost. CE Approval Features : Abundant Output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium plated heater housed in a horizontal borosilicate glass boiler. Efficient Boiler & Condenser:The Boiler and Condenser are designed for high efficiency and provided with threading for easy plumbing of condenser. The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. Temperature of distillate 25-40 deg C. Heater Thermostatically Protected: Heater is a 3 KW Chromium plated heater fitted with a thermostat whcih shuts off automatically in case of water supply failure. Powder coated stand :The stand is zinc plated & powder coated for long rust free operation. Easy and safe to use:Boiler is provided with teflon screw cork for insitu cleaning of the boiler. Specifications : Parameters Values Output 4 lit/hr Distilled water Quality - Conductivity(using raw water) 3.0 - 4.0 X 10-6S/cm Conductivity(using treated water) 1.5 - 2.0 X 10-6S/cm PH 5.5 - 6.0 Distillate Quality Pyrogen free Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW Heater Cooling water reqd (min.) 1 lit/min Min. Pr. 3 p.s.i Dimensions (w x d x l) 50 x 15 x 45 (cm) Weight 6 kgs (app) See Enlarge Click to Enlarge Borosilicate Glass Stills (EASY-STILL MARK-4 ) The Easy-Still Mark-4 has an elegant design, is economical and efficient. It is available in attractive colours. The yield is 4 lit/hr with a power input of 3 KW by a chromium plated heater which is thermostatically protected against overheat. Features : Abundant Output Efficient Boiler & Condenser Heater Thermostatically Protected Easy and safe to use Abundant Output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium plated heater housed in a horizontal borosilicate glass boiler. Efficient Boiler & Condenser:The Boiler and Condenser are designed for high efficiency and and provided with threading for easy plumbing of condenser. The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. Temperature of distillate 25oC-40oC. Heater Thermostatically Protected: Heater is a 3 KW Chromium plated heater fitted with a thermostat for overheat protection. Powder coated stand :The stand powder coated for long rust free operation. Easy and safe to use:Boiler is provided with teflon screw cork for in-situ cleaning of the boiler. Specifications : Parameters Values Output 4 lit/hr Distilled water Quality - Conductivity(using Raw Water) 3.0 - 4.0 X 10-6S/cm Conductivity(using treated water) 1.5 - 2.0 X 10-6S/cm PH 5.5 - 6.0 Distillate Quality Pyrogen free Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW Heater Cooling water reqd (min.) 1 lit/min Min. Pr. 3 p.s.i Dimensions (w x d x l) 48cm x 17.5cm x 61cm (app.) Weight 4.85 kgs (app.) See Enlarge Click to Enlarge Borosilicate Glass Stills (EasyStill 1500 SDQ Single Distillation silica heater ) Easystill Mark 1500 SDQ/DDQ, single and double distillation unit gives high quality distilled water with an output of 1.5 lit/hr, having a power input of 1250 Watts(for SDQ) and 2x1250 Watts(for DDQ) respectively. Easystill's unique features are a well designed boiler fitted with silica heater, Efficient condenser and screw thread connectors makes it an ideal, efficient and economic equipment to obtain pure distilled water for use in general laboratories and in numerous other end uses. Features : Silica Heater: The silica heater helps in easy cleaning of the boiler. The scaling formed can easily be rinsed and no damage is caused to the heating element. Efficient Condenser:The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. Screw thread connectors: All plumbing connections to the equipment including that to the Silica Heater are made via Screw thread connectors with silicon rubber 'o' ring, which helps in easy installation and avoids the danger of glassware breakage during assembly. Powder coated stand Easy and safe to use Specifications: Parameters Values for SDQ Values for DDQ Output 1.5 lit/hr 1.5 lit/hr Distilled water Quality - - Conductivity (using raw water) 3.0 - 4.0 X 10-6S/cm 0.8 X 10-6S/cm Conductivity (using treated water) 1.5 - 2.0 X 10-6S/cm 0.7 X 10-6S/cm PH 5.5 - 6.0 6.0 - 7.0 Distillate Quality Pyrogen free Pyrogen free Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 1250 W Silica heater 220/240 Volts, 50 - 60 Hz, Single Phase, 2X1250 W Silica heater Cooling water reqd 1-3 lit/min 2-4 lit/min Min. Pr. 3 p.s.i 3 p.s.i Dimensions (w x d x l) 250 x 180 x 450 (mm) 2(250 x 180 x 450) mm See Enlarge Click to Enlarge Laboratory Distillation equipment may be used for various purposes namely, to distill - Water, Acids & Solvents. Interlabs has a range of distillation equipment designed for use in every application down to the general laboratory use. Interlabs distillers are made : From Quartz glass for very high purity water, From Borosilicate glass for general applications & From Metal for General & Industrial applications. See Enlarge Click to Enlarge Borosilicate Glass Stills Interlabs WSQ - 4, water distillation unit gives high quality distilled water having an output of 4 lit/hr with a power input of 3 KW. Interlab's unique features along with the safety provisions makes it an ideal equipment to obtain pure distilled water for use in general laboratories and in numerous other end uses. Advantages : Silica Heater Gate valve to prevent water wastage Flow switch for boiler safety Teflon drain cock for easy maintenance High quality distillate Powder coated stand Safety built-in Features : Silica Heater: The silica heater helps in easy cleaning of the boiler. The scaling formed can easily be rinsed and no damage is caused to the heating element. Inbuilt Safety panel: Consists of Gate valve and Flow Switch, which takes care of power supply failure and water supply failure. Hence the unit automatically shuts off in case of water or power supply failure. Efficient Condenser:The distilled output is cool ensured by a highly efficient borosilicate coiled condenser Screw thread connectors: All plumbing connections to the equipment including that to the Silica Heater are made via Screw thread connectors with silicon rubber 'o' ring, which helps in easy installation and avoids the danger of glassware breakage during assembly. See Enlarge Click to Enlarge Borosilicate Glass Stills (Pure Hit Still-XL) Interlabs Pure Hit Still XL provides good quality distilled water for use in laboratories. It is designed for reliable continuous operation and it incorporates several new and advanced safety features Built-in Safety Features: Gate valve to prevent water wastage Flow switch for boiler safety Thermostat for overheat protection Fuse for safety Features: Built-in Safety controls Abundant Output Efficient Condenser High quality distillate Powder coated stand Features : Built-in Safety Controls: The unit has built-in safety incorporating the latest features, such as, oGate Valve, which shuts off incase of power supply failure, thus preventing water wastage oFlow switch, which is provided for boiler safety. It shuts off power supply to the heater, in case of water supply failure. oThermostat: The heater is provided with thermostat for overheat protection. oFuse is provided for safety in case of voltage fluctuations and short circuit. oAdditional On/Off switch with Water failure indicator lamp. Abundant output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium-plated heater, housed in a horizontal Glass boiler. Efficient Condenser: The distilled output is cool ensured by a high efficiency coiled condenser. Temp. of distillate is 25-400C tested at ambient room temperature of 300C High quality distillate: The distillate obtained is of high quality with low conductivity and is pyrogen free. Screw thread connectors are provided for easy plumbing and installation and to avoid the danger of glassware breakage during assembly Powder coated stand: For long, rust free operation. Teflon drain cock: For easy cleaning of the boiler. Specifications : Parameters Values Output 4 lit/hr Distilled water Quality Reagent Grade III Conductivity(using raw water) 3.0-4.0 x 10-6S/cm Conductivity(using treated water) 1.5-2.0 x 10-6S/cm PH 5.5 - 6.0 Distillate Quality Pyrogen free Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW heater Cooling water reqd 1-2 lit/min Min. Pr. 3 p.s.i Dimensions (w x d x l) 500 x 200 x 600 (mm) Nett. Weight 6 kgs (app.) See Enlarge Click to Enlarge Borosilicate Glass Stills (EasyStill 2000 SDQ XL PTS) Interlabs Easy-Still Mark 2000 SDQ/DDQ XL PTS, single and double distillation units provide good quality distilled water with an output of 2.0 lit/hr. Easy-Still's unique features such as silica heater, PTS (Pressure-Temperature Switch), Teflon screw cock for boiler, and screw thread connectors, makes it an ideal, efficient and economical equipment to obtain pure distilled water for use in general laboratories and in numerous other end uses. Special Safety Features: PTS for safety: The unit is provided with PTS(Pressure Temperature Switch) to shut off power supply in case the water level in the boiler falls below the heater level. Fuse:Fuse is provided for safety in case of high voltage and short circuit. Features : Silica Heater:The silica heater helps in easy cleaning of the boiler. The scaling formed can easily be acid rinsed. Teflon screw cock:A Teflon screw cock is incorporated for in-situ cleaning and draining of the boiler Efficient Condenser:The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. The temperature of the distillate is around 25 - 45oC. Screw thread connectors: All plumbing connections to the equipment including that to the Silica Heater are made via Screw thread connectors with silicon rubber 'O' ring, which helps in easy installation and avoids the danger of glassware breakage during assembly. Powder coated stand: The stand is powder coated for long rust free operation. Easy and safe to use Specifications : Parameters Values for SDQ Values for DDQ Output 2.0 lit/hr 2.0 lit/hr Distilled water Quality - - Conductivity (using raw water) 3.0 - 4.0 X 10-6S/cm 0.8 X 10-6S/cm Conductivity (using treated water) 1.5 - 2.0 X 10-6S/cm 0.7 X 10-6S/cm PH 5.5 - 6.0 Not applicable* Distillate Quality Pyrogen free Pyrogen free Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 1500 W Silica heater 220/240 Volts, 50 - 60 Hz, Single Phase, 2X1500 W Silica heater Cooling water reqd 1-3 lit/min 2-4 lit/min Min. Pr. 3 p.s.i 3 p.s.i Dimensions (w x d x l) 250 x 180 x 450 (mm) 2(250 x 180 x 450) mm See Enlarge Click to Enlarge ALL QUARTZ DOUBLE DISTILLER The first All Quartz Double Distiller was introduced by us in the year 1980 for obtaining high purity water. Until then double distilled water was prepared by two seperate operations using conventional glass water still, requiring elaborate handling and often leading to contamination. The distillate obtained from glass double distiller could never be used with satisfactory results for analysis in experiments, where trace elements were to be determined in certain biochemical reactions where studies in enzymes have to be conducted. These disadvantages vanished with the introduction of All Quartz Double Distiller made from electronic grade transparent fused quartz. Features : Quartz distiller, Demountable boiler. Compact design, Dual safety cutout(optional). High purity, low conductivity, Pyrogen free distillate. Easy service and maintenance due to Demountable model. Distillate is free of Heavy metals. Specifications : Model No. AQDD-10P/DB AQDD-15P/DB AQDD-20P/DB AQDD-25P/DB AQDD-30P/DB AQDD-50P/DB Output Capacity (Approx.) 1 ltr/hr 1.5 ltr/hr 2 ltr/hr 2.5 ltr/hr 3.0 ltr/hr 5.0 ltr/hr Electrical Power Reqd. 220/240 V, Single Phase, 2.0 KW Heater 220/240 V, Single Phase, 3.0 KW Heater 220/240 V, Single Phase, 3.5 KW Heater 220/240 V, Single Phase, 4.5 KW Heater 220/240 V, Single Phase, 5.0 KW Heater 440 V, Two Phase, 8.0 KW Heater Cooling Water Consumption 40 lit/hr 50 lit/hr 65 lit/hr 70 lit/hr 100 lit/hr 150 lit/hr Quality of Distillate Title All Quartz Double Distiller Specific Conductivity at 250C less than 0.4 x 10-6S/cm PH at 250C *Not applicable Total Organic Carbon (TOC) mg/lit **Not detected Organic Matter mg/lit NIL Total Solids (mg/lit) 0.1 mg/lit Silica (mg/lit) less than 0.01 mg/lit KMnO4 color retention 60 mins UV absorbance at 254 nm 0.007 Distillate Quality Pyrogen Free Total Plate Count Zero Standard Plate Count Zero Endotoxin less than 0.25 EU/ml Yeast and mould Zero Distillate Temperature 65 - 75 oC See Enlarge Click to Enlarge Mini Quartz Distiller Mini-quartz distiller for water is compact and portable with a specially designed Quartz boiler and Quartz/Borosilicate condenser(optional). Quartz can withstand very high temperatures and it does not easily break on rapid heating and cooling. Quartz being highly resistant, thermally as well as chemically, gives high purity distillate. Advantages : The distillate is pyrogen free, free of heavy metals and pollution free Instant distilled water flow. Switch on time is less than a minute Quartz boiler is chemically inert to most chemicals, hence purer distillate. No heat loss in boiler, hence saves electrical power High performance with low maintenance Has an automatic cut out facility for feed/cooling water supply (optional at extra cost). Specifications : Model No. MQD-1P MQD-2P MQD-3P MQD-4P MQD-5P Output Capacity (Approx.) 1 ltr/hr 2 ltr/hr 3 ltr/hr 4 ltr/hr 5 ltr/hr Electrical Power Reqd. 220/240V, 50 Hz A.C, single phase,1.0 KW Heater 220/240V, 50 Hz A.C, single phase,1.5 KW Heater 220/240V, 50 Hz A.C, single phase,2.0 KW Heater 220/240V, 50 Hz A.C, single phase,2.5 KW Heater 220/240V, 50 Hz A.C, single phase,3.0 KW Heater Cooling water Consumption (Approx.) 25 ltrs. 35 ltrs. 45 ltrs 50 ltrs. 65 ltrs. Quality of Distillate : Title Mini Quartz Distiller Conductivity (using raw water) 1.5 - 2.0 x 10-6S/cm Conductivity (using treated water) 0.8 - 1.0 x 10-6S/cm Distillate Quality Pyrogen Free PH at 250C 5.5 - 6.0 Distillate Temperature 50 - 60oC See Enlarge Click to Enlarge SUB BOILING DISTILLATION ASSEMBLY (For Acids & Solvents) A very useful and effective equipment for the production of very pure and spectroscopic grade acids and solvents for use in research and analytical work. The Sub Boiling Distillation Assembly is made from electronic grade transparent fused quartz. Every possible contact of liquid has been avoided with the ground joint connections. The method adopted for distillation is surface evaporation. The evaporation takes place without boiling by the action of infrared radiators. Evaporation is on the surface and vapours are condensed by a cold finger. During this process of evaporation the liquid is perfectly calm. The distillation rate could be controlled through a suitable Auto Transformer/Variable Transformer (optional, at extra cost) Available in 4 models from 200 ml/hr, 500 ml/hr, 1000 ml/hr and 2000 ml/hr. The yield has been calculated for water. Specifications : The following distillation rates are obtained once steady evaporation has been acheived:- Specifications (Distillation Rate (g/min) W (Watts) H2O HNO3 HCL H2SO4 200 1.1 1.2 0.8 - 400 2.8 3.3 2.9 - 600 4.4 5.3 4.9 0.3 800 5.8 7.5 7.1 0.8 See Enlarge Click to Enlarge All Quartz Double Distiller(AQDD)-XL RSH with PTS New improved version of AQDD with advanced features! Advanced Safety Features of AQDD XL RSH with PTS: Replaceable Silica Heater: Eliminates frequent shut down of the equipment and is service free Quartz Teflon screw cock for in-situ cleaning and draining of the boiler Level sensor for automatic operation PTS (Pressure Temperature Switch) for equipment safety that shuts off the unit when the water level falls below the heater level. Gate valve to prevent cooling water wastage Flow switch for boiler safety. Redesigned unit with larger boiling space and wider condensing area Quality of Distillate : Title All Quartz Double Distiller Specific Conductivity at 250C less than 0.4 x 10-6S/cm PH at 250C *Not applicable Total Organic Carbon (TOC) mg/lit **Not detected Organic Matter mg/lit NIL Total Solids (mg/lit) 0.1 mg/lit Silica (mg/lit) less than 0.01 mg/lit KMnO4 color retention 60 mins UV absorbance at 254 nm 0.007 Distillate Quality Pyrogen Free Total Plate Count Zero Standard Plate Count Zero Endotoxin less than 0.25 EU/ml Yeast and mould Zero Distillate Temperature 65 - 75 oC See Enlarge Click to Enlarge Watch Glasses (L.S.E) Made from clear glass sheet, (1.8mm to 2.0mm thick) fine ground and polished edges. Packed in boxes of 12. 50mm See Enlarge Click to Enlarge Watch Glasses (L.S.E) Made from clear glass sheet, (1.8mm to 2.0mm thick) fine ground and polished edges. Packed in boxes of 12. 65mm See Enlarge [1] 2 [ Next»] Go to Top