Logo
Educational tender items for schools in Malaysia
"AVAILABLE ISI STUDENT MICROSCOPE FOR NCERT KITS (UPSKL, SSK, SSLK BIOLOGY)"
 
Product Range
 
News Letter
All Fields are mandatory.
Your Name :
Country :
Your Email ID:
Security Code
 
   
 

Laboratory Supplies
 
1 [2] 3 4 5 6 7 8 9 10 11 12 13 [«Back ||Next »]
 
Crucibles, Nickel
Click to Enlarge
Crucibles, Nickel

Unibody construction with one piece of sheet nickel, polished inside and out. Lids sold separately.

15ml


See Enlarge



Crucibles, Porcelain (High form)
Click to Enlarge
Crucibles, Porcelain (High form)

Very good, quality porcelain crucibles, made to withstand temperatures up to 1150 degrees C. Glazed inside and out, except for outside bottom surface. Lids included.

15ml


See Enlarge



Crucibles, Stainless Steel
Click to Enlarge
Crucibles, Stainless Steel

Unibody construction with one piece of stainless steel. Lids sold separately.

15ml


See Enlarge



Cryo Box (polycarbonate)
Click to Enlarge
Cryo Box (polycarbonate)

These Cryo Boxes are molded in polycarbonate, making them extra strong and autoclavable. They are designed to be used at temperatures ranging from -190 degrees C to 121 degrees C. The transparent covers provide a good view of the contents, and are numbered for better inventory control.

81 places of 1.0ml or 1.8ml vials.


See Enlarge



Cryo Box (Polypropylene)
Click to Enlarge
Cryo Box (Polypropylene)

Molded in polypropylene, these cryo boxes feature hinged box tops. Available in 2 different sizes, these autoclavable boxes feature an alphanumeric index for easy identification of different vials placed inside.

81 places for 1.0ml or 1.8ml vials


See Enlarge



Cryo Rack
Click to Enlarge
Cryo Rack

Molded in polypropylene , our Cryo Racks are tough, autoclavable, and hold 50 vials. Vials can be unscrewed without actually picking them up as the vial will lock in each well, and will not twist while unscrewing. Rack comes with four anti-skid rubber feet, and each well is identifiable with an aphanumeric index.

Cryo Rack


See Enlarge



Desiccator, Non Vacuum
Click to Enlarge
Desiccator, Non Vacuum

These autoclavale desiccators are made of polypropylene (PP) and Polycarbonate and can hold vacuum up to 740mm Hg for 24 hours without any greasing. The PP stopcock has a self-lubricating PTFE plug that works to create the vacuum, shut it off and release it. Non-vacuum (Plain) desiccators are physically the same as vacuum desiccators. Only difference is the absence of stopcock. Grease should be applied on the glanges to make it air-tight.

8


See Enlarge



Dropping Bottles
Click to Enlarge
Dropping Bottles

Blown in low density polyethylene, these dropping bottles dispense small uniform drops of liquid when pressed lightly.

60ml, pack of 12


See Enlarge



Electronic Pipettes
Click to Enlarge
Electronic Pipettes

Ergonomically designed to operate, our electronic pipettes are available in 6 models to meet all of your pipetting needs. Each pipette is individually calibrated according to ISO 8655 standards. A calibration certificate is provided with each pipette. A charging unit is included at no additional cost.

Volume Range is 0.2-1.0 ul in increments of 0.05 ul and compatible tips are 10 ul.


See Enlarge



Embedding Blocks
Click to Enlarge
Embedding Blocks

Used for celloidin or paraffin sections, these embedding blocks are made of phenolic resin, which can be marked with a glass marking pencil. Top surface has 1/32 deep grid to provide a firm hold for embedding specimen. Blocks are 3/4 high.

Embedding Blocks, 1/2 x 1/2, pack of 10


See Enlarge



Extension Clamps
Click to Enlarge
Extension Clamps

Extension clamp with cork covered jaws, 8 total length

Extension clamp, Steel


See Enlarge



Extension Support Rings
Click to Enlarge
Extension Support Rings

Zinc plated STEEL extension rings. Rod diameter is 5/16, overall

Ring Diameter is 2


See Enlarge



Fully Autoclavable Micropipettes
Click to Enlarge
Fully Autoclavable Micropipettes

Variable Volume (Fully Autoclavable)

Volume Range is 0.2-2.0 ul in increments of 0.01 ul and compatible tips are 20 ul.


See Enlarge



Funnel Holder
Click to Enlarge
Funnel Holder

Made of polypropylene, these corrosion free funnel holders can hold funnels with diameters 3 to 6. The extra plate provided can be placed to hold funnels having diameter 1 to 3. Tow tapered wedges are provided to ensure firm grip on rods having 1/2 or 3/8 diameter.

Funnel Holder


See Enlarge



Funnel, Powder
Click to Enlarge
Funnel, Powder

A good quality polyethylene powder funnel for general lab use. Dimensions are 25mm stem diameter, 100mm top diameter. And 100mm overall length.

Powder Funnel, 100mm


See Enlarge




1 [2] 3 4 5 6 7 8 9 10 11 12 13 [«Back ||Next »]


 

 
 
 
Home|About Us|Products|Certificates|Enquiry|Feedback|FAQ's|Contact Us
Copyright © 2010 - International Biological Laboratories. All rights reserved.
Our Associated Websites
www.interlabs-India.com | www.interlabs.in | www.interlabs.co.in | www.ambalalab.com | www.interlabs.info | www.interlabs-has.com | www.best-visibility.com | www.vidyatechnoart.com | www.labs-glassware.com | www.v-pyrex.com | www.ncert-kits.com | www.shoppingbags.com | www.pharmaceuticalgiftsanatomicalmodels.com
 
myspace profile views counter