| |
Click to Enlarge
|
DIGITAL DISSOLUTION TEST APPARATUS (SIX STAGE)
See Enlarge
|
|
|
|
Click to Enlarge
|
TABLET FRIABILITY TEST APPARATUS (SINGLE DRUM)
The apparatus is designed to determine the abrasion rate and impact hardness of tablets. Two transparent acrylic drums rotated by superior quality constant speed sturdy motor, mounted in painted sheet metal cabinet with chemical resistant epoxy coating.. SPECIAL FEATURES: Realistic abrasion rate is obtained by pre-set revolutions through LED as compared to time setting, where voltage fluctuation may change number of revolution in pre-set time. SPECIFICATIONS: | Drim Diameter : | 285mm | | Tablet Fall Distance : | 140mm | | Drive : | 1/8 HP | | Power Phase. : | AC/230 volt Single |
See Enlarge
|
|
|
|
Click to Enlarge
|
TABLET FRIABILITY TEST APPARATUS (DOUBLE DRUM)
See Enlarge
|
|
|
|
Click to Enlarge
|
BULK DENSITY APPRATUS
Digital Automatic Tap Density Test Apparatus is designed to meet the requirements of USP Standards It can hold two cylinders, capacity: 100 ml. The mechanism provides simultaneously rotating and tapping motion to the cylinders for packing the sample under test evenly and uniformly together. The user has to select the No. of stokes in the counter & other selecting just press start & it will start the stokes & the Digital display shows the No. of strokes.
See Enlarge
|
|
|
|
Click to Enlarge
|
TABLET HARDNESS TESTER (MONSANTO TYPE)
See Enlarge
|
|
|
|
Click to Enlarge
|
TABLET HARDNESS TESTER ( PHYZER TYPE )
A handy, tough and direct dial reading type tablet hardness tester, working as pair of plairs, generates breaking force in single grip. The instrument offers accurate and reproducible result much faster other conventional hardness tester. SPECIFICATIONS : | ACCURACY : | + 0.2 kg | | LEAST COUNT : | 0.2 kg | | SAFE TESTING FORCE : | 20 kg | | MAXIMUM TABLET DIAMETER : | 25 mm |
See Enlarge
|
|
|
|
|
|
|
Click to Enlarge
|
ULTRASONIC BATH (SONICATOR)
Principle of Ultrasonic Cleaning :
Ultrasonics (Ultrasound) is the sound which human beings cannot hear. Ultrasound utilizes frequencies from and above 18khz (18,000 cycles per sound) High frequency electrical energy is converted into ultrasound waves by means of ultrasonic Transducers, which are bonded on the base of S. Cleaning Tank. These high frequency sound waves create in the liquid countless, Microscopic vacuum Bubbles which rapidly expand and collapse. This phenomenon is CAVITATION. These bubbles act like miniature high speed brushes, driving the liquid in to all openings and minute recesses of the Object immersed in the liquid. Intense scrubbing of Cavitation cleans away all the dirt and soil from the object immersed and the object is perfectly cleaned. Intricate objects can be cleaned with either complete or little Dismantling. Applications : | Laboratory : | For Glassware, Filter, Cleaning and HPLC Mobile, Phase Degassing | | Industrial : | Printed Circuit Boards, Semi-Conductors, Electronic Components, Precious Parts and Mechanisms | | Medical : | Dental and Surgical Instruments | | Optical : | Spectacles, Spectacle Frames, Lenses | | Jewellery : | For all kinds of Jewellery, Precious Stones etc. | | To remove : | Dust, Oils, Greases, Polishing Compound, Waxes, Swarf, Stains, Soils and any other Contaminants. |
Silent Features :
- Easy to operates & maintain with one piece S.S. Tank.
- Indigenously manufactured with advanced MOSFET technology with Auto-tuning facility.
- Digital Tuning of Transducers with Generators to avoid any frequency shifted even during demanding applications.
- Compact, rugged and highly durable systems.
- Extensively protected electronic circuits means longer and safer Operations.
Technical Specifications : - Operating frequency 33+-3KHz, for all general purpose cleaning is highly recommended
- Input Voltage range of 170V AC- 270V AC, 50 Hz, 1 Ph.
- Micro Controller based timer range 0 to 30/99 minutes.
- Thermostatic controlled temperature controller.
*Other capacity other than mentioned are also available as per customer requirement.
MODELS AVAILABLE : - 1.0 Litre to 9 Litres
- Heater Optional
- Body S.S. or M.S. Powder Coated
| Capacity | Tank size
(LxBxH)mm | Over all Dimension
(LxBxH)mm | Wattage | | 1.5 Lit. | 240 x 135 x 65 | 265 x 160 x 180 | 60W | | 3.5 Lit. | 300 x 150 x100 | 330 x 175 x 250 | 120W | | 6.5 Lit. | 300 x 150 x150 | 450 x 200 x 350 | 200W | | 9 Lit. | 300 x 200 x150 | 450 x 300 x 370 | 250W |
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL BOMB CALORIMETER
Bomb Calorimeter Outfit provide a simple and inexpensive method for determination of heat of combustion of organic matter and the calorific value & sulphur content of solid & liquid fuel. The outfit supplied is complete for analysis as per the method recommended by British Standard Institution BS 1016. All parts of the outfit have been finished and tested according to the specification laid down by Institute of petroleum and British Standard Institute.
Testing of Bomb :
Each Bomb is tested before it leaves the factory in accordance with the requirement of the Institute of Petroleum (I.P. 12/63 T.Appendix 1) and a works certificate is issued with each Bomb. This certificate gives the results of hydraulic testing under a pressure of 300 atmospheres (4400 p.s.i) maintained for a period of ten minutes without sign of leakage. The maximum deformation must not exceed the specified limits. Calorimeter Vessel :
The vessel is made of copper and is Chromium plated or S.S. It includes a Bomb support that ensures proper positioning of Bomb in the vessel. Water Jacket :
The outer container of Jacket is made of copper and is chromium plated both inside and outside or S.S. The is closed by an ebonite cover. A terminal block is fitted to the of the container so that connection can be made from the firing control. Offset Stirrer :
The stirring mechanism supplied gives sufficient turbulence for effective stirring whilst no heat is imparted to the calorimeter water. It consists of an impeller stirrer driven at a constant speed of approximately 800 r.p.m. The offset arrangement whereby the motor drives the impeller via a belt precludes any possibility of heat transference between motor and calorimeter Vessel Contents. Electronic Firing Unit with Digital Backman Thermometer :
For firing a calorimeter Bomb AC supply main (230 Volts 50 Cycles). It consists of two parts Viz Electrical Box and Electronic Box for Digital Thermometer reading. The Electrical Box is provided with socket for stirrer and terminals for the fuse wire. The unit has provision for test of firing wire resistance or open circuit. A left hand side bulb indicate the continuity while right hand side bulb indicates the open circuit (firing).
Crucible :
Various types of crucible are available the standard supplied with the outfit being a stainless steel crucible of 8 ml capacity which fits in the standard support ring provided with the outfit.
See Enlarge
|
|
|
|
|
|
|
Click to Enlarge
|
STANDARD MODEL
- Open & economical model
- Change over from one gauge to the other by use of two needle valves fitted with the gauges.
- Maximum pointer ( Lazy Hand) for peak value recording.
- Accurate, reliable and one of the oldest selling model.
- Machine available in various specifications to test Paper, Paper Board, Corrugated Board,
- Solid Fibre board, Filter Cloth/ Industrial Fabric etc.
See Enlarge
|
|
|
|
Click to Enlarge
|
SUPER MODEL
- Fully enclosed model.
- Bursting Strength displayed on flat angled gauges for greater accuracy.
- Accurate, reliable and trouble free equipment.
- Available with single or two pressure gauges.
- Change over from one gauge to the other by a simple switch.
- Machine available in various specifications to test Paper, Paper Board, Corrugated Board, Solid Fibre board, Filter Cloth / Industrial Fabric etc.
See Enlarge
|
|
|
|
Click to Enlarge
|
DOUBLE HEAD MODEL
- Twin diaphragm test head for test paper and board respectively.
- Fully enclosed model.
- Bursting Strength displayed on flat angled gauges for greater accuracy.
- Accurate, reliable and trouble free equipment.
- Change over from one head to the other by a simple switch.
- Also available in various other specifications to test Paper, Paper Board, corrugated Board, Solid Fibre board, Filter Cloth / Industrial Fabric etc.
See Enlarge
|
|
|
|
Click to Enlarge
|
MICRO DIGITAL MODEL
- Single push button operation activates an automatic test cycle, determining rapidly the bursting strength of paper or board
- Fully enclosed body.
- Two units of measument (Kg/cm2 & PSI)
- Adjustable clamping pressure.
- Auto Calibration in 5 simple steps.
- Overload protection (Preset).
- Test result remains frozen till next operation
- Changeable peak detection level for different materials
See Enlarge
|
|
|
|
Click to Enlarge
|
MICRO PRINT MODEL(FULLY AUTOMATIC MICRO PROCESSOR BASED)
One button operation, On start, the machine clamps the test sample, starts the test, performs testing, display's for the next test. It completes a lot test of 12 readings which are displayed in ascending order. A detailed print product name, code, etc to print on the graph. The graph display's all test results, mean and average reading, accept / reject status and graphical representation of the test. - Preset peak mode for different test material.
- Auto calibration in two easy steps.
- Display of reading in kg/cm2 and lbs/in2.
- Available in various measuring capacity.
- Machine available in various specifications to test Paper Paper Board, Corrugated Board,Solid Fibre board, Filter Cloth/ Industrial Fabric etc.
See Enlarge
|
|
|
|
|
