Quality Control Laboratory Equipments-> Dynamics

1 2 [3] 4 [«Back ||Next »]   Click to Enlarge Balancing of Reciprocating Masses Features: [Dimension 300 X 250 X 400 Mm The Entire System Is Mounted On A Heavy Duty Frame Which Is Embedded With Multi Springs To Absorb The Shock Generated While Reciprocation Is In Action With Reciprocating System Duly Fixed On The Frame And Driven Through Dc Motor With Variable Rpm Level And Duly Indicated Through The Digital Rpm Monitor] Specifications: Frame Dimension 716 x 283 mm Reciprocating Plate 300 x 285 mm Thickness 6 mm Spring Coupling 230 mm Length Piston Diameter 50 mm See Enlarge Click to Enlarge Spring Masses System Natural and Forced Purpose: This system is used to study Natural frequency by Free and Forced Vibration. This equipment is constructed with rugged steel Frame Slow speed 12 Volt DC Motor is used. With Dimmer arrangements for speed variation Dimension: 700mm (L) 300mm (b) 600mm (H) Resolution : 1 mm Weight : 20 Kg. aprox. Spring Mass System 4034 A Purpose: Free and Forced Vibration use this system to study Natural Frequency This system comes with Damping arrangements and equipment is constructed with rugged steel Frame Slow speed 12 Volt DC Motor is used. With Dimmer arrangements for speed variation Dimension: 700mm (L) 300mm (b) 600mm (H) Resolution : 1 mm Weight : 23 Kg. aprox. See Enlarge Click to Enlarge Study of Fluid Elements Purpose: This system will help the Student to study the Fluid Elements such as Pneumatic and Hydraulic. 5?, 6?, 7? & 8? sizes of Aluminium made Cylinders (any one size) 6mm pneumatic hose to be used for transfer the fluid. Small transparent FRL unit used. Cut Section view of cylinder and Piston arrangement is shown clearly. See Enlarge Click to Enlarge Study of Pneumatic and Hydraulic Control Elements Features: Purpose: To study Fluid Power and Systems 2 way Direction control value (Solenoid Value) Cut-Sectional View of cylinder is shown. Limit Switch is also fitted to control the flow direction. See Enlarge Click to Enlarge Oil Hydraulic Trainer Simplefied Features: Unit Is Complete With Main Frame Supported On Castor Wheels. A Slanted Ms Plate Working Panel Is Fitted With All Components. Electrical Supply, Switches Starters, Pressure Gauges Are Mounted Next To Working Panel. A Hydraulic Power Pack With All Necessary Fittings Are Provided. Circuit Can Be Built Easily By Using Quick Couplings. Hydraulic Hoses With Quick Couplings Are Also Provided. Specifications: Hydraulic Power Pack : With Reservoir, Oil, Level Gauge, Return Line Filter, Breather Filter, Drain Plug Tank Top Gear Pump Coupled To Flange Mounted Electrical Motor ? ? Hp Fitted With Bell Housing And Love Joy Coupling. Starter= Bch Mini Manual For 3 Phase, Pressure Gauges- 2 Nos.0-100 Kg/Sq. Cm Switches- 3 Nos. With Illuminations For Solenoid Valves, Main Switch- Illuminated, Indicator For Pump, Working Panel: Ms4 Or 5 Mm Thick Sheet, About 850Mm X 700 Mm, Drip Tray: To Take Oil To Tank Hose Tray: To House Hoses, Hoses: 1 Meter Length 3/8? With Quick Couplings- 5 Nos. Components: All Are Sub Plate Mounted Type Cylinder- Double Acting Type 3/8? Port Size With 300Mm Stroke Length Pressure Relief Valve Flow Control Valve 4/3 Solenoid- Solenoid Valve With H Type Valve 4/2 Solenoid Spring Dc Valve Pressure Manifold ? 2 Ports Tank Manifold ?2 Ports. See Enlarge Click to Enlarge Scotch Yoke Mechanisim Elaborate Model (Motorized) Features: Specifications Crank length : 40 mm Slider stroke : 70 mm Resolution of measurement : 0.1 mm Overall size : 400 x 300mm Geared Servo Motor : 30 rpm, 230 volts Scotch Yoke Mechanisim Simple Model (Manual) - BSPIL-DYN-04038A Specifications: Crank length : 40 mm Slider stroke : 70 mm Resolution of measurement : 0.1 mm Overall size : 400 x 300mm See Enlarge Click to Enlarge Stroboscope 0- 20000 Rpm Digital Pickup With Flash Gun Features: Stroboscope models are handy instruments.They have been designed to keep its functionals aspects and size optimum.The smaller size of the instrument makes easy for the operator to hold and his studies. stroscope,models have been designed for freeze motion observations in the printing industry for checking the print registrations. It has Xenon flash ube fitted in a 250mm (with 1 no.of flash tube)/500 m (with 2 Nos.of flash tubes)/750mm (with 3 Nos.of flash tubes)long refelector respectively for flashing.The flashing rate is controlled by internal oscillator in "INT"mode.The flashing rate can be varied in this mode by turning control knob (flashes/min)provided on the panel See Enlarge Click to Enlarge Journal Bearing System Features: This setup has four journals bearing of same size, which are used to rotate the shaft friction free. The system is driven by 1/6h.P ac/dc electric motor, speed can be regulated by 2 amp dimmer stat, speed indication is done digitally, speed with varying load condition can be obtained by considering the frictional coefficient and viscosity of lubricant graphical representation can be performed with speed vs. friction. Specifications: Journal Dia ? 49.8mm, Length 50mm Bearing dia ? 50 mm Pressure gauge ? 10 kg/cm2 (Max) Weight set to load the bearing upto 25 Kg. D.C. motor with variable speed control to drive the journal Torque arm and weights for measurement of friction torque Oil outlet flow measurement arrangement Thermometer to measure oil temperature See Enlarge Click to Enlarge Tacho Generator With Digital Pick Up Purpose: This system is constructed to study the Length/Inching Technique of a Rotating body (i.e) the Motor. The Length can be precisely controlled through tacho generator electronic tachogenerator CDT 8/6 250A /1500/10V 18-30 V/ Aluminium Helical coupling to match with Motor Shaft AHC 25-32 6 x 10 Digital counter (PDC 0612 X) Speed Indicator Duly coupled with 1/8 HP AC/DC motor With 230 volts input. See Enlarge Click to Enlarge Universal Speed Setup Consisting of Photo Voltic Pickup Features: Consisting Of Photo Voltaic Pickup, Contact, Non Contact Pickup, Magnetic Pickup Stroboscope 0- 20000 Rpm Digital Pickup With Flash Gun & Motorized Fan Arrangement See Enlarge Click to Enlarge Bifilier Suspension Features: 1200mHeight rugged steel frame. 10mm size Drill chuck with Allen Keys to suspend the mass ? 3 nos. to be used. Stop Watch ? Digital Type. Overall weight approx (25kg) Weight of the mass given: See Enlarge Click to Enlarge Strain Gauge - Cantilever Beam Features: Unique strain measuring system is a unique strain gauge experimenter instrument is a demonstration set up for measurement of strain exerted on the material. It comprises of a complete instrument with instrumentation amplifiers, gain amplifiers power supply with a cantilever beam mounted on a base with pan and weight for demonstration and studying and understanding various aspects of strain gauges. Panel: 3 ? digit RED LED display Potentiometer to set Zero. Power Supply: 230V ? 10% at 50 HZ with perfect grounding. Cantilever Beam: Material: SS Size: (22 x 2.8 x 0.25) cm. Max. Load Capacity: 1kg Strainguage Type: Foil type See Enlarge Click to Enlarge Study of Various Links and Meachnisms - [PYROMATIC] -Manual Features: The System is incorporated with five different mechanisms, which includes sliding contact and rolling contact to visualize and to operate manually as well in mechanized manner; all the five mechanisms are fitted in M.S. base of size (500mm x 400mm) approximately with necessary scaling arrangement. Slider crank Mechanism consists of crank, crankshaft, connecting rod and piston arrangement. It is constructed to understand easily. Scotch yoke Mechanism is constructed in separate Platform to study double slider crank mechanism. Overall size 300(L) x 250(W) x 150(H) Crank Length: 20mm, Stroke length: 65mm Weight (Approx): 6 kg See Enlarge Click to Enlarge Study of Various Links and Meachnisms Features: The System is incorporated with five different mechanisms, which includes sliding contact and rolling contact to visualize and to operate manually as well in mechanized manner; all the five mechanisms are fitted in M.S. base of size (500mm x 400mm) approximately with necessary scaling arrangement. 400(L) x 350(W) x 300(H) rugged steel platform 125 watts, S4 AC/ DC, 6000 rpm Motor coupled 0-6000 rpm variac to control speed. Overall Weight: 15 kg (Approx) See Enlarge Click to Enlarge Draw Velocity and diagram of basic Four Bar Mechanism ? Manual Features: Draw velocity and diagram of basic Four Bar Mechanism using graphical methods including Klein?s construction ? PYROMATIC. The system is made out of Four Bar Chain (i.e.) Crank, Connecting Rod, Slides and sliding chain, to determine velocity and acceleration by graphical method using Klein?s construction. This system consists of slider crank and crank rocker Mechanism. 300(L) x 300(W) x 250(H) rugged steel Platform. Resolution of Angular Measurement: 1 Deg Resolution of Linear Measurement: 1mm Crank length 20 mm, Stroke length: 65 mm See Enlarge 1 2 [3] 4 [«Back ||Next »] Go to Top