| |
Click to Enlarge
|
FAULTS, FRACTURES AND DISLOCATIONS (3072)
Presents cross section of five different structural features. This colorfully painted, molded resin model is actually better than any real-world formations, showing five different structures associated with fault planes and fractures which are practically impossible to find all together in the field.
See Enlarge
|
|
|
|
Click to Enlarge
|
HORIZONTAL STRATA (3073)
Shows realistic illustration of lateral stream erosion and weathering. Underlying layers are section with numbered Key Card.
See Enlarge
|
|
|
|
Click to Enlarge
|
TECTONICS (3074)
This model shows schematically the complicated phenomena, which modified the earth surface. Mounted on base with numbered Key Card.
See Enlarge
|
|
|
|
Click to Enlarge
|
THE EARTH'S LAYER MODEL (3075)
The model is showing the layers in side the Earth. It is in seven detachable parts, which indicate the interior of the Earth. The different colours are used to show the various earth layers. When we take off the upper part i. e., Earth's crust, inner core is clearly visible along with all the layers in a single view. All the layers are detachable one by one to find the periphery of each layer. Supplied on support stand.
See Enlarge
|
|
|
|
Click to Enlarge
|
INSECT SETIING SHOWCASES (3076)
Seasoned wood frame with finger joints. Plywood bottom. Non-rattling glass in wooden frame top. Bottom has thick papered cork-sheet for pinning. Double walled to provide fumigation chambers perforated for pesticide provided and with two brass clips and index card frame. Moisture proof lacquer finish. Sizes available are 600 x 450 x 75mm, 450 x 300 x 62mm, 375 x 250 x 62mm & 300 x 225 x 62mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
INSECT SHOWING SHOWCASE (3077)
Showcase is made of seasoned wood, removable glass frame top. Bottom has 5 or 6mm thick papered cork sheet for pinning. Double walled provide fumigation chamber perforated for pesticides provided with puller brass knobs and card frame. Moisture proof lacquer finish. Size 562 x 500 x 75mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
INSECT SPREADING BOARD (3078)
Made of wood covered with thick cork sheet. The groove from 0 to 12mm is smoothly adjustable, die-pressed adjustment chrome plated brass fittings. Nicely polished. Size 350 x 112 mm (length x width)
See Enlarge
|
|
|
|
Click to Enlarge
|
ANIMAL CAGE (3079)
Strong resilient cage body is moulded in polypropylene for its superior chemical resistance to urine and other body fluids. The body has rounded corners for easy cleaning and to avoid food entrapment and other contaminations. The extra strong wire lid, securely locked to the body top, is made of stainless steel which ensures no coating to chip off or corrode. The four stoppers at the corners prevent scratching thus allowing space saving storage. These can be repeatedly autoclaved and be used with radioactive material. Sizes available are 430 x 270 x 150mm & 290 x 220 x 140mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
WATER BOTILE FOR ANIMAL CAGE (3080)
Autoclaveable Polypropylene bottles having caps with moulded-in stainless steel sipper tubes. Available in capacities Straight nozzle 125 ml, Bent nozzle 125 ml, Straight nozzle 250 ml & Bent nozzle 250 ml.
See Enlarge
|
|
|
|
Click to Enlarge
|
INSECT KILLING JAR (3081)
A glass bottle with plastic screw cap sp8cially made for killing small insects.
See Enlarge
|
|
|
|
Click to Enlarge
|
INSECT NET (3082)
The soft nylon mesh pocket attached with a sturdy 300mm diameter. Metal frame with aluminium handle. Fine mesh.
See Enlarge
|
|
|
|
Click to Enlarge
|
PLANKTON NET (3083)
Strong nylon monofilament netting, aperture size 0.1 mm, with tough nylon collar. The mouth of the net is 300mm diameter and the overall length is 900mm. The net supplied complete with frame and handle.
See Enlarge
|
|
|
|
Click to Enlarge
|
AQUATIC NET (3084)
The telescopic handle makes this net extremely sturdy at full extension. Circular bag with flat bottom and medium mesh netting create an ideal net for general pond use.
See Enlarge
|
|
|
|
Click to Enlarge
|
PLANT PRESS (3085)
For collecting and pressing plants prior to mounting. The plants are laid between sheet of absorbent paper within the frames and the straps are tightening to apply pressure. The frames are constructed of welded wire rod, incorporating carrying handles. Dip plastic coated. Supplied with straps. Dimensions 425 x 300mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
PLANT PRESS, WOODEN (3086)
Heavy duty brass plants 450 x 300mm, finished with synthetic paint. Two heavy brass chrome plated tightening screws and fly-nuts for uniform pressure. Fly-nuts need not be removed totally to lift the upper plank, but can be tilted on the sides.
See Enlarge
|
|
|
|
