| |
Click to Enlarge
|
BEAKERS
Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient becuaseof its tapered spout. Cap. 50ml, 100ml, 250ml, 500ml, 1000ml, 2000ml
See Enlarge
|
|
|
|
Click to Enlarge
|
BURETTE
This burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTFE plug. Each burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except Hydroflouric Acid & Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used upto 5% wt/wt of acids or 30% bases. Cap. 25ml, 50ml
See Enlarge
|
|
|
|
Click to Enlarge
|
PIPETTE PUMP
Fast release pipetting device for precise pipetting & zip quick emptying. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning. Size : 2ml, 10ml, 25ml
See Enlarge
|
|
|
|
Click to Enlarge
|
Dropping Bottles
| Material: LDPE |
| Code |
Capacity(ml) |
Packing |
| 620010 |
60 |
12 |
| 620020 |
120 |
12 |
See Enlarge
|
|
|
|
Click to Enlarge
|
REAGENT BOTTLES (NARROW MOUTH)
These narrow mouth reagent bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polythylene bottles too have excellent strength and are unbreakable. The polypropylene cap has a built in seal ring to make these bottles leakproof. Cap. : 60ml, 125ml, 250ml, 500ml, 1000ml
See Enlarge
|
|
|
|
Click to Enlarge
|
REAGENT BOTTLES (Wide Mouth)
These wide mouth reagent bottles are available in Polypropylene as well as Polyethylene. The PP bottles as rigid, translucent and have excellent contact clarity. These bottles can be autoclaved. Cap. : 60ml, 125ml, 250ml, 500ml, 1000ml
See Enlarge
|
|
|
|
Click to Enlarge
|
ASPIRATOR BOTTLES
Aspirator Bottles are made of Polypropylrnr and are therefore much lighter than glass. These are autoclavable. Cap. 5 Lit., 10Lit., 20Lit.
See Enlarge
|
|
|
|
Click to Enlarge
|
SYPHON
These self priming Syphons can be used for pouring liquids from large containers to small ones without actually lifting them. Cap. : 6mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
WASH BOTTLES
Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character. Solution can be poured easily by squeezing the bottle lightly. Cap. : 125ml, 250ml, 500ml, 1000ml
See Enlarge
|
|
|
|
Click to Enlarge
|
WASH BOTTLES (New Type)
These bottles are also made of Low Density Polyethylene and are therefore translucent & unbreakable. Cap. : 250ml, 500ml, 125ml
See Enlarge
|
|
|
|
Click to Enlarge
|
CONICAL FLASK
Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Cap. : 100ml , 250ml, 500ml
See Enlarge
|
|
|
|
Click to Enlarge
|
FISHER CLAMP
These clamps are moulded in Polypropylene making it completely corrosion proof. The spring loaded jack in the middle provides a vice like grip to the burette and prevents it from slipping. Size : Single and Double
See Enlarge
|
|
|
|
Click to Enlarge
|
FUNNEL HOLDER
Made of Polypropylene, these corrosion free funnel holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3" . Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".
See Enlarge
|
|
|
|
Click to Enlarge
|
SEPERATORY FUNNEL HOLDER
This non-corrosive seperatory funnel holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of seperating funnel. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8"
See Enlarge
|
|
|
|
Click to Enlarge
|
FLASK STAND
Moulded in Polypropylene, this Flask stand gives a stair like top view. Every step provides excellent support to the round bottom flask at every point to contact. This flask stand can hold round bottom flasks up to 10 lit. capacity. This stackable flask stand can also be steam autoclaved.
See Enlarge
|
|
|
|
