| |
Click to Enlarge
|
PIPETTE STAND (HORIZONTAL)
The detacable stand can hold 12pipettes,6on each side,in a horizontal position. moulded in polypropylene,this autoclavable stand has two sides which are attached to each other with three metallic rods coated with polypropylene. this stand can beeasily disassembled for space saving storage.
See Enlarge
|
|
|
|
Click to Enlarge
|
PIPETTE STAND(VERTICAL)
This is a stable non-corrosive,detachable stand which can hold 28 pipettes with maximum dia 14mm. the heavy base measures 225mm in diameter and a polypropylene coated square rod measuring 375mm in length is screwed into the base. the top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. these disc can be adjustedon the rod according to the length of the pipette. the arrows provided on the disc should be kept paralled to ensure that corresponding holes are being centered.
See Enlarge
|
|
|
|
Click to Enlarge
|
PIPETTE STAND (94PIPETTES-ROTARY)
Moulded in polypropylene this unique stand holes a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipettes. the lower rotating disc has four concentric troughs with tapered side and open bottom which cradle the pipettes tips protectively and permit water drops to run off. the upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. this stand can be easily disassembled and reassembled.
See Enlarge
|
|
|
|
Click to Enlarge
|
MEASURING CYLINDERS
Measuring cylinders moulded in polypropylene are single piece cylinders. these autoclable cylinders have raised prominent graduation for easy reading and have excillent contact clarity.the board base provides good stability . Particulars:10ml,25ml,50ml,100ml,250ml,500ml,1000ml,2000ml.
See Enlarge
|
|
|
|
Click to Enlarge
|
MEASURING JUGS
These handing jugs,moulded in polypropylene ,are clear,autoclable and have good chemical resistance.these jugs providedwith a handle for easy and convenient lifting and have raised graduations for easy reading. particulars:250ml,500ml,1000ml,2000ml.
See Enlarge
|
|
|
|
Click to Enlarge
|
CONICAL MEASURES
These concical measures are very good for measuring small quantities of reagents. moulded in polypropylene these autoclable measures have a hexagonal base which provide it excellent stability. the measures are clear have good chemical resistance and have raised graduations for easy reading. particulars:12ml,25ml,50ml,125ml,200ml.
See Enlarge
|
|
|
|
Click to Enlarge
|
SEPERATORY FUNNEL
Seperatory funnel is made of polypropylene giving it excillent contact clarity and strengt. this pear shape autoclable seperating funnel has a leakproof threaded screw cap. the polypropylene stopcock,fitted with self lubricateing PTFEplug is push fitted to the stem of the seperatory funnel. particulars:100ml,250ml,500ml.
See Enlarge
|
|
|
|
Click to Enlarge
|
SPATULA
Moulded in polypropylene spatula consist of a spoon on one side while the other end is a flat contruction with a knife edge.this edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers. particulars:150mm,200mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
PNEUMATIC TROUGH
These troughs made of polypropylene are autoclable and are available in different sizes. these can be used for a wide range of purposes including storage, sterlizing and drying labware etc.
See Enlarge
|
|
|
|
Click to Enlarge
|
PLANTATION POTS
Plantationpots,moulded in polypropylene are avialable in three different sizes. these pots have a downward extended rim which provide convenient lifting even if the pot is filled. the bottom of the pot is provided with holes for drain purpose. particulars:100mm,150mm,200mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
LABORATORY TRAY
Needless to say, laboratory tray moulded in polypropylene is a multipurpose tray that can be used for sterilizing ,drying glassware, porcelainware and other laboratory intruments. these steam autoclable trays have tapered walls which prove good for nesting. Particulars:450x350x75mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
MAGENTA BOX
Magentabox is very often used in tissue culture and agriculturals research experiments. main body of this box is made of tough and transparents polycarbonate which provide excellent view of the contents inside while the cover is made of polypropylene. the autoclable box is square in shape giving itself a space saving feature.
See Enlarge
|
|
|
|
Click to Enlarge
|
STORAGE BOXES
These storage boxes, made of polypropylene, prove to be an excellent option for storage of different powdered reagents and other materialin the laboratory. square shape of these boxes help in saving shelf space. available in two different sizes,these boxes have polypropylene caps are autoclable, provide good chemical resistance and heavy duty service. particulars:500ml,1000ml.
See Enlarge
|
|
|
|
Click to Enlarge
|
SIMPLE CELL POT
Simple cell pot as the name suggests, is used for making simple cells and voltmeters etc. moulded in polypropylene this pot has very good contact clarity and excillent chemical resistance. being in polypropylene this pot is much durable than the one used conventionnallty.
See Enlarge
|
|
|
|
Click to Enlarge
|
LECLANCHE CELL POT
Blown in poltpropylene this pot is used for making leclanche cell. this pot too has very good contact clarity and excillentchemical resistance.
See Enlarge
|
|
|
|
