| |
Click to Enlarge
|
| Function | Range
(Freq Range: 31.5Hz to 8KHz) | Resolution | Accuracy | Sound Level
(Frequency Weighting: A.C) | A Lo (Low) - Weighting: 35dB~100dB
A Hi (High) - Weighting: 65dB~130dB
C Lo (Low) - Weighting: 35dB~100dB
C Hi (High) - Weighting: 65dB~130dB | 0.1dB | + 3.5 dB at 94dB sound level, 1kH sine wave |
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL MULTIMETER (IBL-19)
This rugged instrument, famous for its accuracy and reliability has found a lot of potential for engineers and professionals who look for accuracy. It comes with a holster that provides safety against accidental drops. This instrument is a 3-3/4 Digits 3999 Counts Multimeter that is used to measure AC Voltage upto 750V, DC Voltage upto 1000 V DC, AC/DC Current upto 10A, Resistance, Capacitance upto 200 Micro F, Frequency upto 10MHz, diode testing and transistor testing. It also has audible continuity testing. It comes complete with battery, instruction manual and testing leads. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges.
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL MULTIMETER (IBL-19RS)
This is a 3-3/4 Digits 3999 Counts with anunciator Autoraning Professional Digital Multimeter with the facility for PC interface to download all the measuring data to the PC through RS-232 PC Interface. This instrument is widely used by all professionals for whom data analysis is a must. It is used to measure AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Capacitance, Frequency, Duty Cycle, Temperature, Diode testing, audible continuity testing and 9V battery condition testing. It has RS-232 PC interface facility for downloading the measured data to the PC. It comes complete with rubber holster for protection against accidental drop, testing leads, K type temperature sensor, instruction manual, testing leads, RS-232 PC interface cable, software and battery.
See Enlarge
|
|
|
|
Click to Enlarge
|
PC BASED OSCILLOSCOPE (IBL-2100)
| SYSTEM REQUIREMENTS | WINDOWS 95 / 98 | PC Connection:
| Parallel | Power:
| DC ? 8V (+ :0.8 Am / -; 0.2 AM) | Channel:
| 2 channel | Impedance:
| 1MW 25 pF | Coupling:
| AC / DC / GND | Bandwidth:
| DC ~ 30 MhZ - 3dB | Resolution:
| 8 bit | Voltage Range:
| 50 mV ~ 5V, 1, 2, 5, 7 step | Display:
| 8 x 10 div 9DSO) | Accuracy:
| ? 3% (Gain), ? 0.01 % (Time) | | Time base range: | 5ns ~ 320s | Input range:
| ? 50V | Max. input:
| ? 100 V DC Continuous ? 250 V (DC + AC) Transient | X - Y:
| ? 3% | Auto setup:
| DC ~ 30 MHz, Frequency counter | Sample clock rate:
| 1 Hz ~ 100 MHz | Trigger type:
| ? slope | TV - V / H, TRIG:
| Yes | Trigger source:
| CH1, CH2, EXT | Trigger type:
| Analog | Mag (time):
| OK | | Offset Range: | ? 4 div | Data Acquisition:
| 32 byte / CH | Max Sampling rate:
| 100 MPS / CH, Dual 100 MPS | Auto calibration:
| OK | Trace Display:
| Point / Line | Grid on / off:
| Grid on / off | Vertical mode:
| CH1, CH2, Dual, ADD | Horizontal mode:
| AUTO, NORM, SINGLE | | Single: | DC ~ 30MHz |
SPECTRUM ANALYZER | Channel: | 2 channel | | Methode: | Fast fourier transform | | Spectral Range: | 0Hz ~ 50MHz | | Cursor: | Frequency | | Pass / fall test": | Yes | | Instrument function: | DSO, S/A | | Data Point: | 32K per channel |
GENERAL | Include with Unit | DSO, Power Supply, Software, Cable, Manual, FFT | Optional | Probe (2EA), TV-V/H, TRIG |
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL MULTIMETER (IBL-23SK-II)
Interlabs 23SkII is a compact, rugged, battery operated, handheld 41/2 digital multimeter with capacitance, frequency test facility and large LCD display. They can be used for measuring DC voltage and current, AC voltage and current, resistance diode forward voltage, transistor hFE and open circuit testing with capacitance test facility etc. It is designed for anti-reference and thus is suitable for use in the field, car electric circuit repainnent, laboratory workshop and industrial maintenance etc.
See Enlarge
|
|
|
|
Click to Enlarge
|
AC/DC Power Clamp Tester (IBL-307)
This Digital Clamp On Power Meter Model 307 can be used to measure True Power, Apparent Power and Power Factor in single phase circuits. It measures AC/DC Current and incorporates a frequency counter. It is autoranging type Digtal Clamp On Power Meter and has 3-3/4 Digits 4000 Counts with 40 segment analog bargraph LCD Display. The LCD Display has low battery indication also. Used by technicians for doing power management in all types of industries. It measures True RMS AC Measurement. It has a jaw opening of 2-1/4". It has Minimum, maximum and relative measuring facilities also. It is used to measure DC Voltage, AC Voltage, AC Current, DC Current, Resistance, Active Power, Frequency, Apparent Power and power factor in the range of 0.03 to 1. It has Audible continuity testing facility also. It has an optional facility of PC Interface using a PC interface adaptor with RS-232 Interface cable and software. More details as per leaflet enclosed.
See Enlarge
|
|
|
|
Click to Enlarge
|
GRAPHICAL MULTIMETER (IBL-33N)
This data logging graphical multimeter is a combination of a 3-3/4 Digits True RMS Multimeter with 200kHz Digital Storage Oscilloscope that can store 15 waveforms or measurements. It has a built in RS-232 Interface for PC connectivity. It can do logic analysis. It has self testing facility and can measure Temperature, Humidity and high current measurement by external optional adaptors. In the oscilloscope mode it has both autosetting and manual setting in Time / Div, Volt / Div, mA / Div and A / Div. In the Volt / Div mode it can be varied from 750mV to 500V in 17 Div., in the current / division mode it can be varied from 75mA to 300mA in 4 division and 7.5A to 15A in 2 Division and in seconds / div mode it can be varied from 5microS / div to 1.3 Secs. / Div. It has a sampling rate of 1 million samples / second and a glitch capture of 500ns min. It is rechargeable battery operated and comes along with battery charger / AC mains adaptor. In the Digital Multimeter mode it can be used to measure DC Voltage, AC Voltage, AC Current, DC Current, Resistance, Frequency, trigger is adjustable every 5%, it can test TTL, 3V C MOS and 5V C MOS. It provides a TTL output of 10Hz to 20KHz adjustable. The period and pulse width can also be measured along with duty cylce from 1 - 100%, diode testing and continuity testing. It comes complete with testing leads, RS - 232 Interface cable and software, rechargeable battery and Battery charger. More details as per leaflet enclosed.
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL CLAMP ON POWER METER (IBL-3500)
The unique combination of features offered by this instrument makes it an essential tool for power measurement and diagnostics. This new equipment combines the functionality of a power quality meter, combines the functionality of a power quality meter, oscilloscope and data logger in a single hand-held instrument which has been designed for safety and ease of use. A rotary switch allows the simple selection of the main measurement parameters of V, A, Hz, W and W3~. A more detailed analysis can be made at the touch of a button revealing upto 5 related parameters on one screen including Peak, average, crest factor, fundamental frequency and THD for volts and Amps. A single key press gives access to current and voltage waveforms. For power measurements kW and PF can be displayed with kVA, KVAR or V, A and kWh readings.
See Enlarge
|
|
|
|
Click to Enlarge
|
THERMO ANEMOMETER (IBL-4202)
This instrument is a Digital Thermo Anemometer that measures both temperature and air velocity . It is Portable, fast , has accurate reading, has digital readability and has the convenience of a remote sensor separately. It has multifuction display. It has data hold facility. It is used to measure wind velocity in the range of 0.4 to 30 m/s , 1.4 to 108 km/hr , 80 - 5910 ft/min , 0.8 to 58.3 knots. It measures the temperature both in Degree C and Degree F in the range of 0 to 60 Degree C and 32 to 140 Degree F with a resolution of 0.1 Degree C and 0.1 Degree F with an accuracy of 0.5 Degree C and 0.9 Degree F. It is hand held type and has 3-1/2 Digits LCD Display.
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL MULTIMETER (IBL-454)
This is a rugged 4-1/2 Digits 20000 Counts Large LCD Display True RMS Hand Held Multimeter. It has double injection-moulded body that gives the necessary ruggedness against any accidental drop. A must for all professional and connoisseurs. It has Auto power off facility that turns the meter off if not in use for 30 minutes. It also does have Data Hold facility that freezes the readings of the Digital Multimeter. It is used to measure AC/DC Voltage, AC/DC Current upto 20A, Resistance, Frequency upto 200kHz, Logic Testing, Diode testing and Audible Continuity testing. It comes complete with testing leads and instruction manual. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges.
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL MULTIMETER (IBL-540)
This 4-1/2 Digits 20000 Counts True RMS Digital Multimeter is ideal for engineers, college use and professionals for whom accuracy in readings taken is a must. It has data hold facility, auto power off / Sleep Mode which turns the meter off when not in use. It is 9V battery Operated and is used to measure AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Frequency, and Capacitance, Diode testing and audible continuity testing facilities. It complies to the safety standards of IEC - 1010 - 1, CAT I 1000V, CAT II 600V and CAT III 300V. It comes complete with rubber holster for protection against accidental drop of the instrument, testing leads, instruction manual and batteries. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges.
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL MULTIMETER (IBL-603)
Interlabs 603 is a compact, rugged, battery operated, handheld 31/2 Digital Multimeter with large LCD display. They can be used for measuring DC voltage and current, AC voltage and current, resistance diode forward voltage, transistor hFE and open circuit testing with capacitance test facility etc. It is designed for anti-interference and, thus is suitable for use in the field, car electric circuit repainnent, laboratory workshop and industrial maintenance.
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL MULTIMETER (IBL-608)
This 4-4/5 Digits Digital Multimeter with 50000 Counts LCD Display is ideal for professionals for whom there is no compromise to accuracy. This is a complete Digital Multimeter with facility of analytical analysis via the RS-232 PC interface facility with which all the data can be down loaded to the PC for analysis. It is 9V battery operated and is used to measure AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Suseptance, Capacitance, Frequency, Pulse width, Duty Cycle and temperature. It also has the facility of zener diode and audible continuity testing. This is a CE approved product. It comes complete with rubber holster for protection against accidental drop of the instrument, testing leads, instruction manual, RS-232 Interface cable, software and battery.
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL MULTIMETER (IBL-702)
This is a compact, rugged, battery operated, hand held, 3-1/2 Digital Multimeter with Large LCD Display. This can be used to measure DC Voltage and Current, AC Voltage and Current, resistance, Diode Forward Voltage, Transistor hFE and open circuit testing etc. It is designed for anti - interference and thus is suitable for use in the field, car electric circuit repairment, laboratory workshop and industrial maintenance etc. This instrument is intend for use in installation of over voltage category II according to IEC664, For measuring circuits not exceeding 600V AC/DC, 10A
See Enlarge
|
|
|
|
Click to Enlarge
|
DIGITAL MULTIMETER (IBL-801)
A most complete and most accurate Hand Held Test Tool. It has a 3.3/4 Digits Large Liquid Crystal Display which makes the measurements very simple to read even from a distance. It has CE mark approval and is designed to meet EN61010-1 standards. It has the facility for logic testing, diode testing, transistor testing and audible continuity testing. It has Peak Hold Facility. It has overload protections. It is used to measure AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Frequency and Capacitance. It comes complete with Carrying Case, Testing Leads and instruction Manual.
See Enlarge
|
|
|
|
|
