Digital Meter & Testers-> Digital Multimeters

1 [2] 3 [«Back ||Next »]   Click to Enlarge DIGITAL MULTIMETER (IBL-901) A auto Ranging Digital Multimeter. It is very handy and is highly accurate. It has 3-3/4 Digits Liquid Crystal Display with 3999 Counts and has 42 segments high speed Analog Bar graph. It has Maximum & Minimum Recording and Relative measurement facilities. It complies to the safety standards of 600V Cat II IEC 1010. It has Auto Power Off facility for saving the life of battery when not in use. It is used to measure AC Current, DC Current, AC Voltage, DC Voltage, Resistance and Frequency up to 40 MHz. It has the facility for Diode testing and audible continuity testing. See Enlarge Click to Enlarge DIGITAL MULTIMETER (IBL-901-II) This is a 3-3/4 Digits 3999 Counts Autoranging Digital Multimeter that is a must for all technicians and students of pursuing technical qualification. It has large contrast backlit LCD Display and is the most compact and complete multimeter. It has the facility to measure AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Capacitance, Frequency, Duty Cycle, Temperature in both Degree Centigrade and Fahrenheit scales. It has Diode Testing and audible continuity testing facility. It also has Auto Power Off and relative functions. It comes complete with rubber holster for protection against accidental drop, testing leads, K type temperature sensor, instruction manual, testing leads and battery. See Enlarge Click to Enlarge DIGITAL TACHOMETER (IBL-DT2234C) This Hand Held Non Contact type Tachometer has 5 Digits LCD Display. It is used to measure RPM of equipment that is hard to reach. It is Battery operated. It is used to measure in the range of 5 to 99,999 rpm complete in a box with all standard accessories. It comes complete with reflecting tape and instruction manual. See Enlarge Click to Enlarge DIGITAL TACHOMETER (IBL-DT2235A) This is a Digital Hand Held Contact type Tachometer and has Micro Computer LSI Chip. Having 5 Digit LCD Display , battery operated Range : 5 to 19,999 rpm , 0.05 to 1999.9 m/min , 0.2 to 6560 ft / min. Accuracy of 0.05% with Carrying Case with all accessories in a box with memory call button. It comes complete with instruction manual and various tachometer attachments. See Enlarge Click to Enlarge CONTACT CUM NON CONTACT DIGITAL TACHOMETER (IBL-DT2236) This is a digital contact cum Non Contact combined, Hand Held Tachometer. It has 3 - ? Digit LCD Display. Having measuring range of 5 to 99,999 rpm having 5 Digit to read the resolution in RPM. Accuracy 0.05%. It comes complete with Carrying Case, Reflecting tape, instruction manual with all standard accessories. See Enlarge Click to Enlarge DIGITAL THERMOMETER (IBL-DTM900) It is 3-1/2 Digits 1999 Counts Digital Thermometer with a high resolution for measuring temperature. It is a hand held easy to use instrument with accuracy upto 0.2%. It has a LCD Display and has a sampling rte of 2.5 times per second. The instrument has an indication of over range by showing ?1? or ?-1? on the LCD Display. It also has low battery indication. This instrument is best for field use. A must for all technicians. It is used to measure temperature in both Degree Centigrade and Farenheit scales. It measures temperature from ?20?C to 1300?C and from ?50?F to 1999?F. The resolution is user selectable between 0.1? and 1?. See Enlarge Click to Enlarge Digital Frequency and Multifunction Counter (IBL-FC1300) This is an Intelligent Dual Channel Frequency Counter and has 8 digits LED Display. It measures frequency up to 1.3 GHz. It is SCM controlled and calculated to achieve precise frequency and period measurement of bandwidth. It achieves both frequency and period measurement. DC/AC coupling function is incorporated to perfect low frequency characteristic below 10 Hz. It has frequency measurement range of 1 Hz to 1.3 GHz. It has dual channel. It has a highly stable temperature dependent oscillator. The auxiliary power supply is 220V Single Phase AC 50 Hz. See Enlarge Click to Enlarge NON CONTACT DIGITAL THERMOMETER (IBL-MT10) This Digital Non Contact type Infra Red Thermometer with laser sensor uses temperature sensor of Thermopile 8 - 14 mm and measures temperature from -50 to 1000 Degree C and also in Fahrenheit scale. It has CE mark approval, has portability and simple one hand operation. It has back light LCD Display. The last data displayed on the LCD is always freezed automatically. It has auto power off facility. The Distance to Sighting ratio is 50:1 and the emissivity is fixed at 0.95. This is primarily used in places where accessibility is a problem. See Enlarge Click to Enlarge NON CONDUCT INFRARED THERMOMETER (IBL-MT4) This Digital Non Contact type Infra Red Thermometer with laser sensor uses temperature sensor of Thermopile 6 - 14 mm and measures temperature from -50 to 280 Degree C and also in Fahrenheit scale. It has CE mark approval, has portability and simple one hand operation. It has back light LCD Display. The last data displayed on the LCD is always freezed automatically. It has auto power off facility. The Distance to Sighting ratio is 8:1 and the emissivity is fixed at 0.95. This is primarily used in places where accessibility is a problem. See Enlarge Click to Enlarge NON CONDUCT DIGITAL THERMOMETER (IBL-MT5) This Digital Non Contact type Infra Red Thermometer with laser sensor uses temperature sensor of Thermopile 6 - 14 mm and measures temperature from -50 to 550 Degree C and also in Fahrenheit scale. It has CE mark approval, has portability and simple one hand operation. It has back light LCD Display. The last data displayed on the LCD is always freezed automatically. It has auto power off facility. The Distance to Sighting ratio is 8:1 and the emissivity is fixed at 0.95 . This is primarily used in places where accessibility is a problem. See Enlarge Click to Enlarge NON CONTACT DIGITAL THERMOMETER (IBL-MT6) This Digital Non Contact type Infra Red Thermometer with laser sensor uses temperature sensor of Thermopile 6 - 14 mm with laser specifications wavelength of 650microm to measure temperature from -20 to 550 Degree C and also in Fahrenheit scale. It has CE mark approval, has portability and simple one hand operation. It has dual display back light LCD Display. It can also record Min and Max values. The Distance to Sighting ratio is 10:1 and the emissivity is adjustable from 0.1 to 1.00. This is primarily used in places where getting near the target whose temperature is to be measured can not be reached. It is used to measure from a distance of 2 feet to 50 feet. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges. See Enlarge Click to Enlarge NON CONTACT DIGITAL THERMOMETER (IBL-MT8) This Digital Non Contact type Infra Red Thermometer with laser sensor uses temperature sensor of Thermopile 6 - 14 mm and measures temperature from -50 to 700 Degree C and also in Fahrenheit scale. It has CE mark approval, has portability and simple one hand operation. It has back light LCD Display. The last data displayed on the LCD is always freezed automatically. It has auto power off facility. The Distance to Sighting ratio is 8:1 and the emissivity is fixed at 0.95 . This is primarily used in places where accessibility is a problem. See Enlarge Click to Enlarge NON CONDUCT DIGITAL THERMOMETER (IBL-MT9) This Digital Non Contact type Infra Red Thermometer with laser sensor uses temperature sensor of Thermopile 8 - 14 mm and measures temperature from -50 to 1000 Degree C and also in Fahrenheit scale. It has CE mark approval, has portability and simple one hand operation. It has back light LCD Display. The last data displayed on the LCD is always freezed automatically. It has auto power off facility. The Distance to Sighting ratio is 12:1 and the emissivity is fixed at 0.95. This is primarily used in places where accessibility is a problem. See Enlarge Click to Enlarge DIGITAL ANEMOMETER (IBL-MT9) This instrument used to measure the wind speed is portable, fast , has accurate reading, digital readability and has the convenience of a remote sensor separately. It has multifuction display. It has data hold facility. It is used to measure wind velocity in the range of 0.4 to 30 m/s. It is hand held type and has 3-1/2 Digits LCD Display. See Enlarge Click to Enlarge NON CONDUCT DIGITAL THERMOMETER (IBL-MTX8) This Digital Non Contact type Infra Red Thermometer with laser sensor uses temperature sensor of Thermopile 8 - 14 mm and measures temperature from -50 to 750 Degree C and also in Fahrenheit scale. It has CE mark approval, has portability and simple one hand operation. It has back light LCD Display. The last data displayed on the LCD is always freezed automatically. It has auto power off facility. The Distance to Sighting ratio is 12:1 and the emissivity is fixed at 0.95. This is primarily used in places where accessibility is a problem. See Enlarge 1 [2] 3 [«Back ||Next »] Go to Top