Digital Meter & Testers-> Digital Multimeters

1 2 [3] [«Back ]   Click to Enlarge NON CONTACT INFRARED THERMOMETER (IBL-MTX9) This Digital Non Contact type Infra Red cum Contact type Thermometer with laser sensor uses temperature sensor of Thermopile 7 - 14 mm to measure temperature from -18 to 1000 Degree C in the Non Contact Infra Red Mode and -20 to 1300 Degree C in the contact mode using K type Thermometer and also in Fahrenheit scale. It has CE mark approval, has portability and simple one hand operation. It has dual display back light LCD Display. It has Data Hold Facility. The Distance to Sighting ratio is 8:1 and the emissivity is adjustable from 0.3 to 0.99. This is primarily used in places where getting near the target whose temperature is to be measured can not be reached. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges. See Enlarge Click to Enlarge DIGITAL LUX METER (IBL-RPS-1300) Features Pocket size and light weight Measuring range from 0.1 lux to 50,000 lux Resolution to 0.1 LUX measurement Dimensions: 188 x 64.5 x 24.5mm Weight: 160g 3 1/2 digit LCD display with low battery indication Resolution to 0.1 LUX measurement 20000 lux: reading x 10; 50000 lux: reading x 100 Includes one 12v battery Photo Detector dimensions: 115 x 60 x 27mm Specifications Measuring Range: 200, 2000, 20000, 50000 LUX Accuracy:? 5% rdg ? 10dgts (< 10,000 lux) Accuracy: ? 10% rdg ? 10dgts (>10,000 lux) (Calibrated to standard incandescent lamp 2856K) See Enlarge Click to Enlarge DIGITAL LUX METER (IBL-RPS-1332) Features CE Approval With Lux and fc rwo units select function With PEAK/DATA HOLD function Cosine corrected: f'2 <3% Display with backlight Specifications Display: 3 1/2 digit liquid display (LCD) with maximum reading of 1999 Overrange: (OE) is displayed Low battery indication: the is displayed when the battery voltage drops below the operating level Measurement Range: 2.5 times per second, nominal Operating Environment: 0?C to 50?C (32?F to 122?F) at < 70% relative humidity Accuracy: Stated accuracy at 23?C ? 5?C (73?F ? 9?F) < 70% relative humidity Battery: standard 9V battery (NEDA 1604, IEC 6F22 006P) Battery life: 200 hours typical with carbon zinc battery Dimensions: 190mm (H) x 65.5mm (W) x 35mm (D) Weight: 210g including battery Photometric Formulas: 10.764 footcandles = lux (lumens / meter2) 0.0929.lux = footcandles (lumens / foot2) Range: 200lux, 2000lux, 20klux, 200klux, 200fc, 2000fc, 20kfc, 200kfc Resolution: 0.1lux, 0.1fc Spectral Response: Metravi photopic (The Metravi photopic curve is an international standard for the color response of the average human eye) Acceptance Angle: f2 < 3% cosine corrected (150?) Total accuracy for Metravi standard illuminant A(2856K) ? (3% rdg + 10 dgts) The Metravi standard illumination A can be realized by means of Metravi standard source A, which is defined as : A gas-filled tungsten-filament lamp operating at a correlated colour temperature of 2856K Temperature Coefficient: 0.1x (specified accuracy) / ?C (<18?C or > 28?C), 0.056x (specified accuracy) / F? (<64.4?F or 82.4?F) Peak hold response time: > 50mS pulse light See Enlarge Click to Enlarge DC REGULATED POWER SUPPLIES (IBL-RPS-3005) Features One channel output Two Red LED digital output voltage and current value each Constant voltage, current stabilizer, the two states can be auto-changeable Current-limifing protection and limiting-dot adjustable optionally Specifications Output Voltage: 0-30V Output Current: 0~5A Load Effect (CV): ? 2 x 10-4 + 1mV Load Effect (CC): ? 22mA Source Effect (CV): ? 2 x 10-4 + 0.5mV Source Effect (CC): ? 5 x 10-4 + 5mA Ripple & Noise (CV): ? 1m Vrms Ripple & Noise (CV): ? 1m Arms Display Accuracy: ? ? 1% + 2 words Working Temperature: 0~40?C Reliability MTBF: ? 2000h Dimensions (W x H x L): 140 x 165 x 290 Weight: About 5kg See Enlarge Click to Enlarge DC REGULATED POWER SUPPLIES (IBL-RPS-3010) Features One channel output Two Red LED digital output voltage and current value each Constant voltage, current stabilizer, the two states can be auto-changeable Current-limifing protection and limiting-dot adjustable optionally Specifications Output Voltage: 0-30V, 0-10A Variable Output Current: 0~10A Load Effect (CV): ? 2 x 10-4 + 10mV Load Effect (CC): ? 5 x 10-3 + 10mA Source Effect (CV): ? 2 x 10-4 + 3mV Source Effect (CC): ? 5 x 10-3 + 3mA Ripple & Noise (CV): ? 1m Vrms Ripple & Noise (CV): ? 1m Arms Display Accuracy: ? ? 1% + 2 words Working Temperature: 0~40?C Reliability MTBF: ? 2000h Dimensions (W x H x L): 260 x 160 x 310 Weight: About 10.5kg See Enlarge Click to Enlarge DC REGULATED POWER SUPPLIES (IBL-RPS-3020) Features One channel output Two Red LED digital output voltage and current value each Constant voltage, current stabilizer, the two states can be auto-changeable Current-limifing protection and limiting-dot adjustable optionally Specifications Output Voltage: 0-30V, 0-20A Variable Output Current: 0~20A Load Effect (CV): ? 2 x 10-4 + 10mV Load Effect (CC): ? 5 x 10-3 + 10mA Source Effect (CV): ? 2 x 10-4 + 3mV Source Effect (CC): ? 5 x 10-3 + 3mA Ripple & Noise (CV): ? 1m Vrms Ripple & Noise (CV): ? 1m Arms Display Accuracy: ? ? 1% + 2 words Working Temperature: 0~40?C Reliability MTBF: ? 2000h Dimensions (W x H x L): 260 x 160 x 390 Weight: About 17kg See Enlarge Click to Enlarge SOUND LEVEL METER (IBL-RPS-SL4005) Features Large 3 1/2 digital LCD display with function indication Wider measuring range with high accuracy Data hold function Max hold function Specifications Two mode provide 2.5dB or 3.5dB accuracy A and C weighting, high and low measuring ranges: low (35-100dB), High ( 65 to 130dB) 0.1dB resolution Fast / slow response Data HOLD and MAX hold Large 31/2 digital Built-in calibration check (94dB) Complete with oV battery and carrying case Dimensions: 215 x 63.8 x 40mm/250g See Enlarge Click to Enlarge DC REGULATED POWER SUPPLIES (IBL-RPS3002) Features One channel output Two Red LED digital output voltage and current value each Constant voltage, current stabilizer, the two states can be auto-changeable Current-limifing protection and limiting-dot adjustable optionally Specifications Output Voltage: 0-30V Output Current: 0~2A Load Effect (CV): ? 2 x 10-4 + 1mV Load Effect (CC): ? 22mA Source Effect (CV): ? 2 x 10-4 + 0.5mV Source Effect (CC): ? 5 x 10-4 + 5mA Ripple & Noise (CV): ? 1m Vrms Ripple & Noise (CV): ? 1m Arms Display Accuracy: ? ? 1% + 2 words Working Temperature: 0~40?C Reliability MTBF: ? 2000h Dimensions (W x H x L): 140 x 165 x 290 Weight: About 4kg See Enlarge Click to Enlarge DIGITAL MULTIMETER (IBL-XB-30) This is a mini low cost Digital Multimeter that has 3-1/2 Digits 1999 Counts. The unique feature of this instrument is that it has flexible LCD Display whose viewing angle can be changed for reading convenience. It is used to measure AC Voltage upto 600 V AC, DC Voltage upto 600 V DC, DC Current upto 10A DC, Resistance, Transistor testing and Diode testing facility. This instrument is ideal for use of students and for amateurs. It comes complete with testing leads and instruction manual. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges. See Enlarge Click to Enlarge DIGITAL MULTIMETER (IBL-XB-31) This is a mini low cost Digital Multimeter that has 3-1/2 Digits 1999 Counts. The unique feature of this instrument is that it has flexible LCD Display whose viewing angle can be changed for reading convenience. It is used to measure AC Voltage upto 600 V AC, DC Voltage upto 600 V DC, DC Current upto 10A DC, Resistance, Transistor testing and Diode testing facility. This instrument is ideal for use of students and for amateurs. It comes complete with testing leads and instruction manual. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges. See Enlarge 1 2 [3] [«Back ] Go to Top