| |
Click to Enlarge
|
YOUNG'S MODULUS APPARATUS (LSE)
| Searle’s pattern, spirit level mounted in two rectangular cast iron frame with one end resting on point of micrometer screw, fitted in one frame, the second end of spirit level pivoted in the second frame. The micrometer is provided with vertical scale 10mm on either side of the zero and Vernier reading 0.01mm, complete with ceiling bracket having two self centering chucks and tension weight. The apparatus is black stove enamel finish in nicely finished case. |
See Enlarge
|
|
|
|
Click to Enlarge
|
YOUNG'S MODULUS APPARATUS (LSE)
| Vernier pattern, for the experimental determination relationship between a load applied to a wire and the resulting extension. The apparatus consists of an engraved brass scale 100mm long and Vernier reading 0.1mm. Complete with tension weight but without load masses. |
See Enlarge
|
|
|
|
Click to Enlarge
|
INCLINED PLANE & FRICTION BOARD (LSE)
| A plane wooden board 600x75mm hinged to the base at one end and provided with a pulley for the force cord at the other. A movable block enables the inclination of the plane to be varied. The friction slider 100x65mm is reversible. Complete with metal roller 75x25mm dia. with scale pan. |
See Enlarge
|
|
|
|
Click to Enlarge
|
FRICTIONAL APPARATUS (LSE)
| This set includes a friction block and a friction board, both made of wood. Students can vary the weight or area of contact to see their impact on the friction force. Comes with three 50gm weights and a 100gm spring balance. |
See Enlarge
|
|
|
|
Click to Enlarge
|
FRICTION BLOCK (LSE)
The traditional block used for coefficient of friction studies. The block is wooden, size 15x8x2cm with a hook in one end.
See Enlarge
|
|
|
|
Click to Enlarge
|
FRICTION BLOCKS & SURFACES (LSE)
| This kit provides a convenient introduction to frictional characteristics of different materials. The kit contains 3, 3x4 inch wood blocks; 1 with a mirror cemented to 1 side, 1 with sandpaper cemented to 1 side and 1 plain. A 3x14 inch mirror is supplied as the surface. |
See Enlarge
|
|
|
|
Click to Enlarge
|
FRICTION BOX (LSE)
| Useful for coefficient of friction studies when loads are required. The 6x3.5x2.5 inch box will accommodate loads of 2000gm or more. |
See Enlarge
|
|
|
|
Click to Enlarge
|
DOUBLE CONE & RAMP (LSE)
To the casual observer, the cone appears to defy gravity as it rolls uphill on the ramp. If, however, you keep track of the cone's center of gravity, you will see that it does in fact obey the laws of physics. The widening ramp permits the cone's center of mass to drop slightly as the cone rolls "up" the ramp.
See Enlarge
|
|
|
|
Click to Enlarge
|
TICKER TIMER TAPE (LSE)
Width 9.5mm, in rolls approx. 300meter long.
See Enlarge
|
|
|
|
Click to Enlarge
|
CARBON PAPER DISC (LSE)
CARBON PAPER DISC Available in pack of 100 pieces.
See Enlarge
|
|
|
|
Click to Enlarge
|
THERMOMETRES MERCURY (LSE)
Mercury in glass, with white enameled back. 5/7 mm dia. with reinforced bulbs. Packed in cardboard case. Length 300mm approx.
See Enlarge
|
|
|
|
Click to Enlarge
|
THERMOMETER RED SPIRIT (LSE)
Total Length approx. 300mm
See Enlarge
|
|
|
|
Click to Enlarge
|
THERMOMETER CLINICAL (LSE)
Screen-printed stem, enameled back. Range 94?F to 108?F or 35?C to 43?C in plastic case with cap.
See Enlarge
|
|
|
|
Click to Enlarge
|
THERMOEMETR POCKET (LSE)
Mercury filled, white enameled back, in plastic case with pocket clip. Thermometer cap may be inserted into case to extend reach. Range ?10? to 110?C x 1?C length 155mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
THERMOMETER COMBINED (LSE)
Range 0 to 110?C x 1/1?C & 0 to 220?F x 2/1?. You can see in Fahrenheit & Celsius both at the same time
See Enlarge
|
|
|
|
