| |
Click to Enlarge
|
MASSES, HEXAGONAL, SPARE
Made of stove enamelled cast iron masses except the 10g and 20g masses which are made of polished brass. Sold separately.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASS SET CYLINDRICAL, WITH HOOK, SET OF NINE
For general science and physics laboratory work. Supplied in a wooden block. Includes one each of 10g, 50g, 100g, two each of 20g, and 200g, (all made of plated brass) and one each of 500g and 1000g (both made of cast iron, enamelled finish).
See Enlarge
|
|
|
|
Click to Enlarge
|
MASSES WITH HOOKS, SPARE
As included in the above set
See Enlarge
|
|
|
|
Click to Enlarge
|
SLOTTED MASSES ON A RACK, BRASS, METRIC
Useful where a known force must be exact as in experiments on force table, moments, and sonometer. Made from brass. Each mass is stamped with its value. Provided with side supports and nuts for easy assembly. Set of 3 masses: 10g, 50g, and 500g
See Enlarge
|
|
|
|
Click to Enlarge
|
SLOTTED MASSES (WEIGHTS) ON A RACK, BRASS, CALIBRATED IN NEWTONS
Identical to the metric mass set described above. Set of 11 masses: 0.1N(5), 1N(4), 0.5N, 5N
See Enlarge
|
|
|
|
Click to Enlarge
|
HANGER, 50g
For hanging slotted masses described in 3410-03, 3410-08 and 3410-11. Made of brass.
See Enlarge
|
|
|
|
Click to Enlarge
|
SLOTTED MASSES, SPARE
For slotted masses on rack and 50g hanger. Made of brass with standard slots as supplied on racks.
See Enlarge
|
|
|
|
Click to Enlarge
|
WEIGHT BOXES, GENERAL PURPOSE
For general laboratory work. Include one of 1g, 5g, 10g, 50g, 100g, 500g, 1000g and two of 2g, 20g and 200g masses. Total number of masses supplied depends on the range chosen as indicated below. Plated brass weights (masses) with knob in a wooden case having a hinged lid. Calibrated according to tolerances specified by International Organisation for Legal Metrology, Class M2. Fractional weights are not included. Note: we can substitute two 10g masses with one 20g mass and two 50g masses with one 100g mass according to your requirement. We can quote and accept orders for other combinations of masses.
See Enlarge
|
|
|
|
Click to Enlarge
|
WEIGHTS (MASSES) FOR WEIGHT BOXES, SPARE
See Enlarge
|
|
|
|
Click to Enlarge
|
MASSES WITH HOOKS ON BOTH SIDES
Made of plated brass.
See Enlarge
|
|
|
|
Click to Enlarge
|
VERNIER CALIPER, DUAL SCALE, IMPROVED DESIGN
For inside, outside, step and depth measurement. Has metric scale to 15cm in 1mm steps and the 10 part vernier reads to 0.1mm least count. English scale is graduated to 6in in 1/16in divisions and the 8 part vernier reads to 1/128in least count. Verniers are adjustable and can be trued, if desired. Automatic cam locking device allows fine adjustment along the main scale. Made of plated steel and packed in a velvet lined case.
See Enlarge
|
|
|
|
Click to Enlarge
|
VERNIER CALIPER, DUAL SCALE
For inside and outside measurement in metric or English units. Ideal for learning precision measurement techniques by using the vernier principle. Has metric scale to 12.5cm in 1mm steps and the 10 part vernier reads to 0.1mm. English scale is graduated to 5in in 1/16in divisions and the 8 part vernier reads to 1/128in. Features a locking pin to secure readings and knurled thumbwheel permits fast, easy measuring. Beveled cross horns are useful for internal measurements. Made of plated steel and packed in a plastic case.
See Enlarge
|
|
|
|
Click to Enlarge
|
CALIPERS, DIRECT READING (GRAIN CALIPERS), DUAL RANGE
Two piece brass construction. Reads by vernier to 0.1mm (1/128in).
See Enlarge
|
|
|
|
Click to Enlarge
|
MICROMETER CALIPERS (MICROMETER SCREW GAUGES), METRIC & ENGLISH
For measurement of small outside diameter, thickness etc. Ideal for engineering and technical schools to teach the working of this instrument. Consists of a frame of solid brass body with a chrome satin finish and a hardened steel screw. Provided with a ratchet and a locknut for accurate readings. Zero adjustment is possible. Pitch of the screw is 0.5mm and the least count is 0.01mm. Micrometers with English scale has pitch of 0.05in and the least count of 0.001in. Packed in a plastic case.
See Enlarge
|
|
|
|
Click to Enlarge
|
PULL SPRING SCALES (SPRING BALANCES), METRIC, NEWTON & DUAL SCALE
For determining weights by spring elongation which is proportional to the applied force. For laboratory use. Made of strong polystyrene with a flat anodised metal scale. Provided with a zero adjuster, suspension ring and a load hook. Metric.
See Enlarge
|
|
|
|
