| |
Click to Enlarge
|
CLAMPS, HOOK COLLAR (2128)
Comprises an annular ring with a suspension hook and tightening thumb screw. Made of plated steel. Useful for suspending masses, pulleys, spring balances etc., from the vertical as well as horizontal support rods. Available for rod sizes (inner diameter) of 12.5 & 19mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
BURETTE RACK, VERTICAL, WOODEN (2129)
Rack made of polished hardwood. The tier wooden frame has upper tier with vertical recesses on one side to take burettes. Can take up to 13 burettes.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE STAND, PLASTIC (2130)
A single piece, moulded plastic test tube stand has 2 rows of 6 holes each to take up to 12 test tubes 4 holes of about 25mm diameter and 8 holes of 16mm diameter. also has five vertical pegs for draining. The single piece moulding makes it long-lasting and durable.
See Enlarge
|
|
|
|
Click to Enlarge
|
STAND, BURNER, WITH WIRE GAUZE (2131)
Rectangular frame of plated metal wire has wire mesh gauze fixed at its top to prevent direct contact of the container surface with the flame, to facilitate gradual and uniform heating of container surface and to allow easy positioning of the container.
See Enlarge
|
|
|
|
Click to Enlarge
|
TONG, BEAKER / FLASK, SIMPLE (2132)
A simple and economical tong for holding beakers or flasks. Made of plated flat steel strip, scissors shaped, with holding jaws bent in L-shape to facilitate the holding grip.
See Enlarge
|
|
|
|
Click to Enlarge
|
TONG, BEAKER I FLASK, FISHER PATTERN (2133)
Made of stainless steel wire rolled flat at jaw ends. 80th the gripping jaws curved for positive gripping and shrouded with silicon rubber sleeve to provide thermal insulation to the metal body and to ensure firm grip.
See Enlarge
|
|
|
|
Click to Enlarge
|
PCR TUBE RACK (2134)
Useful for keeping PCR tubes. Top and base of the rack are made of tough and transparent polycarbonate, while the middle portion is of moulded polypropylene. The rack has tube holding spaces uniformly placed so as to facilitate the use of multi-pipettes. A number of racks can be stacked together to save shelf space. The rack has capacity to take up to 96 tubes of 0.2mL each.
See Enlarge
|
|
|
|
Click to Enlarge
|
PIPETTE CASE (2135)
Completely made of polypropylene, this cylindrical shaped, two part, pipette case is specially designed so as to hold pipettes of various different lengths together. The top of the case screws on to the bottom and the total available height can be adjusted by screwing or unscrewing the top to the desired level.
See Enlarge
|
|
|
|
Click to Enlarge
|
UNIVERSAL REAGENT RESERVOIR (2136)
This universal reagent reservoir is a graduated single reagent reservoir with a maximum volume of 50mL on one side and a reservoir with eight separate numbered reagent channels of capacity 5mL each along with a reservoir with twelve separately numbered reagent channels also of 5mL capacity on the other side. Made of polypropylene, these reagent reservoirs are repeatedly autoclavable and can be used with all multichannel pipettes.
See Enlarge
|
|
|
|
Click to Enlarge
|
MICRO PESTLE (2137)
This is a double ended pestle moulded from polypropylene, with one end of the pestle fitting 1.5mL microcentrifuge tube and the other end fitting 0.5mL micro-centrifuge tube.
See Enlarge
|
|
|
|
Click to Enlarge
|
STIRRERS (2138)
Made of polypropylene, these stirring rods are non-corrosive, non-staining and are very useful for stirring different solutions in the laboratory. These stirrers have been designed to be tough and longlasting in use. Sizes (length x diameter) available are 250x10mm, 200x7mm, 250x7mm & 300x7mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
POLICEMEN STIRRING RODS (2139)
This is, in fact, a multipurpose product made of polypropylene, designed in the form of circular rods with flat ends, thus enables its use as stirrer as well as spatula. The two different shaped flattened ends of this rod form two small spatulas. Available in size 245x6mm (length x diameter).
See Enlarge
|
|
|
|
Click to Enlarge
|
PIPETTE STORAGE RACK (2140)
Unbreakable rack, made of ASS plastic, useful for holding and storing pipettes. The rack holds 1 to 25mL pipettes in bulk, in packs or in common sizes of cans. It features 4 different compartments, angled, for easy loading and retrieval. Unique windows allow viewing of enclosed pipettes to determine supply level. ASS plastic construction makes it scratch resistant and easily cleanable. Each rack comes with two accessory attachments for holding pipette filler and pipette bulb.
See Enlarge
|
|
|
|
Click to Enlarge
|
DESICCATOR CABINET (2141)
All plastic, sealed construction, transparent sides and front provides clear inside view. Specially designed to block 99% of ultraviolet light. All cabinets feature a built in hygrometer for indicating inside humidity level and are lockable to ensure secured storage of the desiccants. Sizes (height x width x depth) available are 210x340x410mm, 310x340x410mm, 410x340x410mm & 510x340x410mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
MINI SECADOR (2142)
It provides dust and moisture free storage in freezers. refrigerators and bench-tops. Ideally suitable for hygroscopic biological and chemical compounds. The door is provided with a high quality rubber gasket and positive latch to facilitate sealed. air-tight, closing with the main body. Available in size 330 x 250 x 210mm.
See Enlarge
|
|
|
|
