| |
Click to Enlarge
|
MAGNIFIER, FOLDING, METAL CASE (0193)
Gowland type Plano-convex lens of extra white glass mounted in unbreakable plastic lens holder and anodized aluminium case. Magnification 10x.
See Enlarge
|
|
|
|
Click to Enlarge
|
MAGNIFIER POCKET TYPE, WITH POUCH (0194)
Single convex lens of diameter 40mm magnification 3.5x, folding into a soft plastic pouch.
See Enlarge
|
|
|
|
Click to Enlarge
|
DELUXE POCKET MAGNIFIER (0195)
A portable magnifier used for detailed examinations by Jewelers, geologists, engravers, machinists, manufacturers, dermatologists, and hobbyists size 30 x 50mm. Folding into a case for safety. Magnification 6x Field of view 20mm Working Distance: 30mm
See Enlarge
|
|
|
|
Click to Enlarge
|
POCKET MAGNIFIER (0196)
Has a break-resistant lens made of optical grade acrylic. A magnifier that can be conveniently carried in the pocket. Folding into a case for safety.
Magnification 3 x
Field of view 20x20mm
Working Distance: 40mm
See Enlarge
|
|
|
|
Click to Enlarge
|
SOLDERING IRON (0197)
With insulated handle, leak proof, lightweight body, element tested for high insulation, gives instant heating with constant tip temperature. Available in power ratings. Available with Pencil, Oval, Henlay Type Bits.
See Enlarge
|
|
|
|
Click to Enlarge
|
SOLDERING WIRE (0198)
Pack of 100g, used with soldering irons for soldering.
See Enlarge
|
|
|
|
Click to Enlarge
|
SOLDERING FLUX PASTE (0199)
For applying to the surfaces being soldered to obtain a clean solder joint without and blow-hole or dry soldering. Supplied in pack of 50g.
See Enlarge
|
|
|
|
Click to Enlarge
|
BENCH HOLDER FOR SOLDERING IRON (0200)
For safety & conveniently supporting the hot soldering iron during use. Comprises a substantial heavy, stable base, spring shaped holder to contain the soldering iron and sponge for wiping the hot bit.
See Enlarge
|
|
|
|
Click to Enlarge
|
DESOLDERING PUMP (0201)
For sucking and collecting the molten solder metal during desoldering. Pushing the spring loaded piston down completely engages it and is released at the push of button creating suction.
See Enlarge
|
|
|
|
Click to Enlarge
|
SCREW DRIVER, ELECTRICIANS (0202)
With moulded plastic insulating handle and hardened steel shaft. Length overall about 150mm and blade width 3mm approx.
See Enlarge
|
|
|
|
Click to Enlarge
|
WIRE STRIPPER (0203)
Scissors shaped, spring loaded. For cutting and stripping insulated wires. Provides for adjustment according to wire thickness.
See Enlarge
|
|
|
|
Click to Enlarge
|
MAINS TESTER CUM SCREW DRIVER (0204)
Small screw driver with a moulded plastic handle containing a neon indicator and with pocket clip. End of the plastic handle has insulated shaft of plated steel. It is intended to serve as a mains tester over the voltage range from 100\1. to 500\1. When the blade is brought in contact with the live wire with the other end having metal screw touched with hand, the indicator glows. Overall length 140mm approx.
See Enlarge
|
|
|
|
Click to Enlarge
|
CORKBORER,SHARPNER (0205)
Plated metal cone with hinged cutter blade set in slot and handle.
Borer restored to circular shape by cone, edge cut to correet angle depressing blade using thumb pressure. For borer diameters 4-27mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
CORK BORING MACHINE (0206)
For drilling uniform and straight holes in cork or rubber stoppers. 'C' type Cast-iron frame with rugged and stable base having a platform of about 1 Oem diameter at its top to support work. Includes adjustable guide rod, and a central hole through wheel spindle for ejector rod and introduction of lubricant (water or methylated spirit). Complete with set of 12 nickel-plated borers with cutting sizes from 7 to 25mm diameter.
See Enlarge
|
|
|
|
Click to Enlarge
|
CORK PRESS (0207)
Wheel type cork press made of cast iron, for softening corks evenly, by rolling without increasing the porosity. To accommodate corks up to 32-mm diameter. Mounted on wooden base.
See Enlarge
|
|
|
|
