| |
Click to Enlarge
|
MASSES, SLOTTED, BRASS (0105)
Precision turned brass masses with slots, similar to the ones used in MASSES SET, SLOTTED AND HANGERS, BRASS, but available individually.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASSES, SLOTTED, BRASS 5g,10g, 20g, 50g, 100g (0105)
Precision turned brass masses with slots, similar to the ones used in MASSES SET, SLOTTED AND HANGERS, BRASS, but available individually.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASS HANGERS, BRASS (0106)
Hanger made of brass wire with hook, similar to the ones used in MASSES SET, SLOTTED AND HANGERS, BRASS, but available individually.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASSES SET, SLOTTED AND HANGERS, STEEL (0107)
MASSES SET, SLOTTED AND HANGERS, STEEL - One hanger of 100g and nine slotted masses of 100g each, giving a total set of 10 masses of 1000g.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASSES, SLOTTED, STEEL (0108)
Precision turned steel masses with slots, similar to the ones used in MASSES SET, SLOTTED AND HANGERS, STEEL but available individually of 10g.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASS HANGERS, STEEL (0109)
Hanger made of steel wire with hook, similar to the ones used in MASSES SET, SLOTTED AND HANGERS, STEEL but available individually.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASSES, FRACTIONAL (0110)
Precisely adjusted fractional masses, made of special alloy, for use with analytical balance. Complete set contained in a small plastic round case and consists of masses in 1 -2-2-5 system from 1 to 500mg.
See Enlarge
|
|
|
|
Click to Enlarge
|
FORCEPS (0111)
Chrome plated brass forceps for lifting and holding masses for balances, length approx. 90mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
WEIGHING SET, ECONOMICAL (0112)
Masses for general purpose weighing from 10 to 1990g x 10g, involving moderate to low accuracy levels. The set comprises masses: Steel 1 x200g, 1 x500g, 1 x1kg; and Brass - 2x10g, 1 x20g, 1 x50g, and 2 x 100g. Supplied in wooden block.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASSES, HEXAGONAL, BRASS (0113)
Hexagonal bar masses made of brass surfaces at both ends. Masses available are 50g, 100g, 200g, 500g & 1000g.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASSES, HEXAGONAL, STEEL (0114)
Hexagonal bar masses made of steel with flat surfaces I at both ends. Plated masses also available on specific request.
See Enlarge
|
|
|
|
Click to Enlarge
|
MASSES, HEXAGONAL, CAST IRON (0115)
For large weighing requirements. Hexagonal masses of cast iron, well painted, with lifting ring. Within tolerances as per international standards. Masses available are: 50g, 100g, 200g, 500g, 1Kg, 2Kg, 5Kg.
See Enlarge
|
|
|
|
Click to Enlarge
|
SLOTTED MASSES SET, CAST IRON (0116)
A set of slotted masses and hanger of cast iron particularly suitable for use where larger suspension loadings are needed such as with sonometers. Hanger and masses are interlocking type to prevent slipping of masses and are well painted.
See Enlarge
|
|
|
|
Click to Enlarge
|
SLOTTED MASSES SET, IRON (0117)
Similar to SLOTTED MASSES SET, CAST IRON but made of MS rod instead of cast iron. One Hanger ,of 1 kg with four slotted masses of 1 kg each, giving a total set of 5 masses of 5kg. Well painted.
See Enlarge
|
|
|
|
Click to Enlarge
|
HYDROMETER, NICHOLSON (0118)
For experiments involving solid and liquid density determination.
Comprises hollow metal flotation body, upper loading pan and weighted lower loading pan, all sheet metal construction, black painted. Overall dimensions - Length 25cm x diameter 4cm.
See Enlarge
|
|
|
|
|
