| |
Click to Enlarge
|
STOPCOCKS - Borosilicate Glass (0703)
Three-way, double oblique bore, plain side arms, Borosilicate glass. Available in Bore of Key 2mm & 3mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
STOPCOCKS - High Performance (0704)
High performance, straight type plain bores. Available in Bore 3mm, Overall length 205 Side Arms OD 8mm, Bore 6mm, Overall length 205 Side Arms OD 10mm & Bore 10mm, Overall length 225 Side Arms OD 13mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
RECEIVER ADAPTERS, BENT, WITH STOP COCK (0705)
Bend with Socket connection and glass stop cock for providing fine flow control and positive closure in chemical corrosion free environment. Nos 20/1 Socket B14 Cone B14, Nos 20/2 Socket B19 Cone B19 & Nos 20/3 Socket B19 Cone B24.
See Enlarge
|
|
|
|
Click to Enlarge
|
RECEIVER ADAPTERS, STRAIGHT, WITH STOP COCK (0706)
Straight receiver adapter with socket connection and glass stop cock for providing fine flow control and positive closure in chemical corrosion free environment. Nos 21/1 Socket B14 Cone B14, Nos 21/2 Socket B14 Cone B19 & Nos 21/3 Socket B19 Cone B19.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, DIE CAST (0707)
Die cast metal alloy, finished in acrylic paint with brass headed nickel-plated steel screws. For use with rods up to 16mm diameter.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, SWIVEL With cylindrical link (0708)
Die-cast metal alloy boss-head, provides rotatable adjustment of support rod at any desired angle with respect to the horizontal axis. With cylindrical link between the two rotatable holders.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, SWIVEL With Flat tapered cross-link (0709)
Die-cast metal alloy boss-head, provides rotatable adjustment of support rod at any desired angle with respect to the horizontal axis. With Flat tapered cross-link between the two rotatable holders.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, RIGHT ANGLED, SQUARE (0710)
Die cast metal alloy boss-head with two square grooves at right angle to each other to accept rods/pipes of different sections - square, round hexagonal etc., held securely by means of threaded bolt at either end.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, DIE CAST, DOUBLE 'V' Black (0711)
For use with laboratory stand in school and colleges. Die-cast metal alloy, two V-grooves orthogonal to each other to accept rods up to 16. 5mm diameter, which are secured through nickel-plated thumb screws. Also Available as Zinc plated.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, DIE CAST, DOUBLE 'V' Zinc Plated (0712)
For use with laboratory stand in school and colleges. Die-cast metal alloy, two V-grooves orthogonal to each other to accept rods up to 16. 5mm diameter, which are secured through nickel-plated thumb screws. Available as Black and Zinc plated. Also Available as Black.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, DIE CAST, DOUBLE V, WITH PLASTIC HEADED THUMB SCREWS (0713)
Similar to BOSS HEAD, DIE CAST, DOUBLE 'V' but with tightening thumb screws having moulded plastic screw-heads instead of plated, all metal thumb screws. Zinc plated die-cast metal alloy body.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, SQUARE (0714)
Die-cast alloy metal body, accepts square and tubular sections up to 16. 5mm diameter at right angles to each other. Will also hold flat articles such as rulers, magnets, drawing board metal/wooden strips etc. Dimensions 30x30x50mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, WITH DETACHABLE ATTACHMENTS (0715)
Multipurpose Aluminum section boss head with brass headed nickel plated steel thumb screw and plated wing shaped nut for fixing the different attachments like thermometer holders, suspension hangers etc. A unique design with phosphorus bronze clamps for holding objects vertically or horizontally, gives it more flexibility.
See Enlarge
|
|
|
|
Click to Enlarge
|
BOSS HEAD, WITH DETACHABLE ATTACHMENTS and with Thermometer Hanger (0716)
Multipurpose Aluminum section boss head with brass headed nickel plated steel thumb screw and plated wing shaped nut for fixing the different attachments like thermometer holders, suspension hangers etc. A unique design with phosphorus bronze clamps for holding objects vertically or horizontally, gives it more flexibility. Available with Thermometer Hanger.
See Enlarge
|
|
|
|
Click to Enlarge
|
CLAMP UNIVERSAL (0717)
Made of sheet metal, enamel painted, spring controlled curved jaws, two pronged, cork lined, which can accept about 12 to 50mm diameter articles, with brass wing nut, for tightening the clamp jaws. Fitted with 15cm long plated MS rod for mounting on suitable boss-head.
See Enlarge
|
|
|
|
