| |
Click to Enlarge
|
PIPETTE STAND, VERTICAL, HEAVY, POLYPROPYLENE (0778)
Stable, non-corrosive, detachable stand with heavy base, which can hold maximum of 28 pipettes of up to 14mm diameter. The base measures 225mm in diameter and a polypropylene coated square rod about 375mm in length is screwed on to the base. This rod carries two discs, upper one has holes for holding pipettes while lower one has pilot holes for supporting tips of the pipettes from where liquid drains out to the base. The distance between both the discs is adjustable according to length of the pipette.
See Enlarge
|
|
|
|
Click to Enlarge
|
NESTLER CYLINDER STAND (0779)
Made of polypropylene, this stand is used for' supporting Nestler's Cylinders. Supports up to 6 Nestler's cylinders. Available in two sizes of cylinder of 50ml & 100ml.
See Enlarge
|
|
|
|
Click to Enlarge
|
PIPETTE STAND, VERTICAL, LIGHT, POLYPROPYLENE (0780)
Moulded in polypropylene, the stand holds maximum of 94 pipettes and is rotatable about vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric annular troughs with tapered sides and open bottoms, which cradle the pipette tips protectively and permits liquids drops to run off. The upper disc has grid pattern that corresponds to the bottom disc and keeps pipettes vertical. Stand can be easily assembled and disassembled.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE BASKET (0781)
Made of polypropylene, the rectangular baskets
are autoclavable, unbreakable, noncorrosive, and are ideal for rinsing and draining glassware. Also useful for easy handling and compact storage of test tubes and culture tubes during sterilization or incubation. Sizes available are 140x120x110mm & 160x160x160mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBES STAND, 6 TUBES, ALUMINIUM (0782)
Made of thick aluminium sheet, anodized. Can accept 2 tubes of 25mm and 4 tubes of 16mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBES STAND WIRE PATTERN POLYPROPYLENE (0783)
An economical substitute for wire racks, these test tube stands made of polypropylene are submersible, autoclavable and can be stacked when empty. Available in different colours, these stands are made of special blend of polypropylene that makes it sink in water bath and maintain their stability even in agitated water. The racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE STAND, POLYPROPYLENE (0784)
Most commonly used test tube stand. Rack with six holes is supported at each end by a vertical column. The top plate has 2 holes for 25mm tubes and 4 holes for 16mm tubes with corresponding recesses at
bottom plate just below the holes. Bottom plate also has 6 vertical pegs for drying test tubes.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE STAND, ROUND, POLYPROPYLENE (0785)
Handy, space saving. round shape, made of polypropylene, for 12 tubes - 4 of 25mm diameter and 8 of 19mm diameter through the holes on the top plate, which is supported on bottom plate through 4 vertical pins. The base has recesses corresponding to the holes in the top plate, 16 vertical pegs for drying test tubes and is surrounded by a trough shape
to contain drippings. This autoclavable stand can be easily is assembled for cleaning.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE STAND, MICRO TUBES (0786)
Moulded in polycarbonate. these autoclavable racks hold 1.5ml micro centrifuge tubes. Racks are stackable which prevents movement in any direction. The holes are numbered and lettered for easy identification.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE STAND, WOOD / PLASTIC (0787)
Comprises wooden base and top with single row of holes. without pegs. Clips together quickly and easily with two moulded ASS plastic supports - one on either side. Supplied flat for compact storage when
not in use. Height 11 cm. can accepts 6 tubes of up to 21 mm diameter.
See Enlarge
|
|
|
|
Click to Enlarge
|
UNIVERSAL MULTI RACK (0788)
The rack is designed to be compatible with wide range of tube diameters. This rectangular shaped rack has holes on all the four sides to take tubes of diameters 30mm, 20mm. 17mm and 12mm, respectively.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE STAND, WOODEN, WITH DRYING PEGS for 6 Test Tubes (0789)
Made of seasoned hardwood. well polished, with single row of holes. Vertical pegs are provided for quick drying of the test tubes. For Six Test tubes, with six pegs, two holes of 32mm diameter and four holes of 22mm diameter.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE STAND, WITHOUT DRYING PEGS 12 test tubes in Single Row (0790)
Made of seasoned hardwood. well polished. Without vertical drying pegs. For 12 test tube. 2 holes of 32mm diameter and 10 holes of 22mm diameter, all holes in single row.Also available for 12 test tubes in 2 rows.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE STAND, WITHOUT DRYING PEGS 12 test tubes in Two Rows (0791)
Made of seasoned hardwood. well polished. Without vertical drying pegs. Also available for 12 test tubes in 2 rows. For 12 test tube. in two rows of holes of same size. Also available for 12 test tubes in single row.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE STAND, 3 TIER, POLYPROPYLENE (0792)
Made of polypropylene. these racks feature 3-tier design that provides clear view of tube contents. and allows convenient insertion and removal of tubes. Chemical and corrosion resistant. autoclavable. and can withstand sub-freezing temperatures. Available for (tubes diameter x No. of tubes) 13mm x 31 tubes, 16mm x 31 tubes, 20mm x 20 tubes, 25mm x 12 tubes, 25mm x 18 tubes, 32mm x 12 tubes, 25mm x 36 tubes, 13mm x 18 tubes, 15mm x 18 tubes, 18mm x 12 tubes, 13mm x 62 tubes, 16mm x 62 tubes, 20mm x 40 tubes, 13mm x 48 tubes & 13mm x 75 tubes.
See Enlarge
|
|
|
|
