| |
Click to Enlarge
|
WATER BATH, ECONOMICAL (0358)
Economical and reliable water baths ideal for general laboratory use. Inner tanks constructed of stainless steel. Optimum control of temperature is achieved by the thermostat sensor and heating element being clipped together below a perforated tray. Volume of water used can be varied depending on need, up to the maximum stated. A thermal safety device switches off the power to the heater if overheating occurs. Temperature range 5?C above ambient to 80? C. Temperature selector has an arbitrary scale 0 to 10 supplied with main leads, ON/OFF indicating light. Operates on 220-240V AC, 50/60Hz. Supplied complete with 3-core mains cable with connector. Baths are available in capacities
WATER BATH, ECONOMICAL - Cap 4L, Temp Fluctuation ±1°C, Power Rating 500W, Working Space 300x150x150,
Overall Dimensions - 330x180x237.
WATER BATH, ECONOMICAL - Cap 14L, Temp Fluctuation ±1°C, Power Rating 1kW, Working Space 325x300x150,
Overall Dimensions - 355x330x237.
WATER BATH, ECONOMICAL - Cap 20L, Temp Fluctuation ±1°C, Power Rating 1.5kW, Working Space 500x300x150,
Overall Dimensions - 535x330x237.
See Enlarge
|
|
|
|
Click to Enlarge
|
THERMOSTATIC WATER BATH, WITH EVAPORATION LID (0359)
A low cost water bath, which is fully compatible substitute for expensive ones. The completely transparent tank has seamless construction and is made of polycarbonate plastic that can withstand 120?C. Fast acting thermostat also serves as low-water-Ievel protector, providing safety against heating element burn-out and fire hazards, and incorporates temperature setting in ?C from ambient to 100?C. The thermostat allows for temperature control accuracy of about ?0.3?C ensures precise test conditions. When combined with evaporation lid, this water baths becomes a boiling bath. The evaporation lid has six opening of about 105mm diameter, which are equipped with concentric rings to reduce the diameter of the openings to accommodate container of different sizes.
See Enlarge
|
|
|
|
Click to Enlarge
|
SAND BATH (0360)
Tinned iron, with flat bottom and deep sloping sides. 150x38mm, (diameter x depth).
See Enlarge
|
|
|
|
Click to Enlarge
|
MELTING POINT APPARATUS (0361)
Electrically heated apparatus, useful for determination of melting points of single solids or mixture up to 350?C. Consisting of cast aluminium case with enclosed heating block and thermostatic control. Support for thermometer is also provided. Specially designed heaters are provided for uniform heating, fine temperature control, provision for up to three melting tubes. Includes magnifying lens for capillaries with shadow less illumination. An ON/OFF switch controls illuminator lamp and power input to the apparatus. Supplied complete with cooling plug for heating block, thermometer and mains cord. Operates on 220-240V, 50Hz. AC.
See Enlarge
|
|
|
|
Click to Enlarge
|
INCUBATOR (0362)
Double walled construction with two doors. Inner surface made of thick anodized Aluminium sheet except for the inner door, which comprises a glass panel mounting on sturdy frame. Outer body is of thick gauge mild steel sheet finished in durable white or gray enamel colour, with thick glass wool insulation between the outer and inner walls. The temperature is controlled by a precision thermostat ranging from 5?C above ambient to BO?C with a sensitivity of 0.5?C. Supplied with two pilot indicator lamps, thermostat, air regulator, two expanded metal shelves adjustable at any level. Operates on 220-240V AC, 50Hz. Supplied complete with mains cord.
Available in various sizes.
INCUBATOR - Size 300x300x300mm
INCUBATOR - Size 355x355x355mm
INCUBATOR - Size 455x455x455mm
INCUBATOR - Size 455x605x455mm
INCUBATOR - Size 605x605x605mm
INCUBATOR - Size 910x605x455mm
See Enlarge
|
|
|
|
Click to Enlarge
|
INCUBATOR UNIVERSAL- FOR LABORATORY USE (0363)
Highly reliable and efficient incubator for Embedding, Incubating and Bacteriological work and other general laboratory applications. Double walled, inside made of thick sheet metal and outer body of thick mild steel sheet finished in durable white or gray enamel colour, having thick glass wool insulation between the walls. The door has double viewing window at the front to permit observation without causing any disturbance inside. Two adjustable air ventilators are placed near the top of the sides providing natural convection. Built-in Horizontal "L:' shaped thermometer with range of 0 to 110? C is fitted on front. The temperature is controlled by a precision thermostat with temperature ranging from 5?C above ambient to BO?C with a sensitivity of O. 5?C. Incorporates two pilot lamps, thermostat, and perforated shelves adjustable on non-tip shelf runners. Also have the provision for the installation of the automatic timer. Operates on 220/230V AC, 50Hz. Supplied complete with 3-core mains cord. Available in various sizes. Available in Inner Chamber of Anodized Aluminium sheet or Stainless Steel sheet
INCUBATOR UNIVERSAL- FOR LABORATORY USE - Size 420x255x280mm
INCUBATOR UNIVERSAL- FOR LABORATORY USE - Size 300x300x300mm
INCUBATOR UNIVERSAL- FOR LABORATORY USE - Size 355x355x355mm
INCUBATOR UNIVERSAL- FOR LABORATORY USE - Size 455x455x455mm
INCUBATOR UNIVERSAL- FOR LABORATORY USE - Size 455x605x405mm
INCUBATOR UNIVERSAL- FOR LABORATORY USE - Size 605x605x605mm
INCUBATOR UNIVERSAL- FOR LABORATORY USE - Size 605x910x455mm
INCUBATOR UNIVERSAL- FOR LABORATORY USE - Size 605x910x605mm
See Enlarge
|
|
|
|
Click to Enlarge
|
SOXHLET EXTRACTION HEATER, MANTLE TYPE (0364)
Comprises multiple heating mantles similar to HEATING MANTLES number of mantles for heating are provided instead of Hot Plates. Suitable for flasks of 200-350mL capacity. Also available in other capacities on specific request.
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 3 Mantles, total Rating 480W, with single energy regulator for all the mantles
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 4 Mantles, total Rating 640W, with single energy regulator for all the mantles
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 6 Mantles, total Rating 960W, with single energy regulator for all the mantles
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 3 Mantles, total Rating 480W, with individual energy regulator for each.
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 4 Mantles, total Rating 640W, with individual energy regulator for each mantle
SOXHLET EXTRACTION HEATER, MANTLE TYPE - 6 Mantles, total Rating 960W, with individual energy regulator for each mantle
See Enlarge
|
|
|
|
Click to Enlarge
|
OVEN, UNIVERSAL (0365)
For Laboratory Use. Sturdy, durable, double walled construction - inner chamber made of thicker gauge anodized Aluminium sheet and outer casing of Mild steel sheet finished in long lasting enamel colour. The gap of 75mm between two walls is filled with high grade, pure white glass wool. Heating elements are placed in ribs at the bottom and on the side walls. Adjustable air ventilators are placed near the top of the sides. Also incorporates a built-in horizontal 'L' shaped thermometer with range 0 to 250?C is fitted. The temperature is controlled by a precision thermostat with temperature range from 5?C above ambient to 250?C with a sensitivity of ? 1?C. The outer case fitted with two pilot lamps, thermostat knob and ON/OFF switch. Supplied complete with two perforated shelves adjustable at any level. Operates on 220-240V AC, 50Hz. Includes 3-core mains cord. Available in various sizes (inner chamber - W x H x O) as 420x25x280mm, 300x300x300mm, 355x355x355mm, 455x455x455mm, 455x605x405mm, 605x605x605mm, 605x910x455mm & 605x910x605mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
MUFFLE FURNACE (0366)
For applications requiring high temperature enclosed chamber. Comprises thick mild steel sheet furnace reinforced with iron angles. Inner heating chamber consisting of rectangular cuboid shape, totally enclosed muffle baked at 1000?C. High temperature heating elements made of special high temperature alloy Kanthal wire and are located so as to obtain uniform heating. All furnaces are equipped with a Pyrometer with mounting bracket to indicate temperature ranges of up to 1200?C. Furnace can be operated continuously at temperature up to 900?C with a maximum temperature of 950?C. Temperature is controlled by high quality Energy Regulator with a control knob fitted on the lower front portion of the furnace with two indicating lights. Electricals are fuse protected. Operates on 220-240V AC, 50Hz. Includes 3-core mains cord in various sizes.
MUFFLE FURNACE - Muffle Size (inside) - 100x100x225 - Rating 1.6kW.
MUFFLE FURNACE - Muffle Size (inside) - 125x125x250 - Rating 2.0kW.
MUFFLE FURNACE - Muffle Size (inside) - 125x100x300 - Rating 2.5kW.
MUFFLE FURNACE - Muffle Size (inside) - 125x135x300 - Rating 3.0kW.
MUFFLE FURNACE - Muffle Size (inside) - 150x150x300 - Rating 3.5kW.
MUFFLE FURNACE - Muffle Size (inside) - 200x100x300 - Rating 4.0kW.
See Enlarge
|
|
|
|
Click to Enlarge
|
WATER STILL, WITH AUTOMATIC SHUT OFF (0367)
A fully automatic, electrically heated, wall mounting, Manesty type water still, designed for continuous use, for distillation of water to produce high purity, pyrogen free water. The undistilised water enters ower end of the tube, circulates around the condenser tube and ultimately filling the boiling chamber to a height predetermined by means of a weir. The descending steam in the condenser tube thus pre-heats the ascending column of raw water and expels gases dissolved in it, venting them to the atmosphere. The steam generated in the boiling chamber passes through a system of baffles. The baffles are so arranged that the vapours change direction three times before passing into the condenser tube. The boiling chamber, condenser pipe and tube, weir assembly and inner baffles are made of stainless steel. The outer lid and inner baffle cup being made of clear glass. The whole unit can be easily disassembled for regular maintenance, cleaning and scaling. Electric elements are fitted with resettable protective cutouts. Includes brackets for wall mounting. Operates on 220-240V AC, 50Hz. Includes 3core mains detachable cord. Output capacity about 4L per hour.
WATER STILL, WITH AUTOMATIC SHUT OFF - Heating Elements for Water Still, supplied as spare, in set of 2.
See Enlarge
|
|
|
|
Click to Enlarge
|
WATER STILL, GLASS, SUPERIOR (0368)
An electrically controlled laboratory water still or distillation apparatus that can be either wall or bench mounted. Capable of producing high quality distillate with the minimum of care and maintenance. Comprises a borosilicate glass horizontal boiling chamber with silica sheathed element, vertical double condenser system and control unit mounted on a sturdy stand having scratch resistant epoxy coating. Fully automatic water still has constant level water control, auto heater cut-off. Designed for easy cleaning and maintenance, when the heater is inoperative. No metal parts come into contact with water or water vapour, eliminating the possibility of corrosion or metal contamination of distillate. Output capacity about 4L of pyrogen free distillate per hour and is suitable for use with deionised water supply. Safety features include resettable thermal fuse, automatic water level controller and water pressure fail-safe device. High performance, long life, silica sheathed heating element rated at 3kW. Provided with indicator type ON/OFF switch. Operates on 220240V AC, 50/60Hz.
See Enlarge
|
|
|
|
Click to Enlarge
|
pH METER, DIGITAL, PROFESSIONAL (0369)
A professional pH/mV meter with pH range 014xO.01pH; and mV range -1999 to 1999m\l. Microprocessor based circuit assures high accuracy and reliable performance. Front panel provided with buttons that can manually adjust wild temperature compensation range easily. A probe also available optionally for auto temperature compensation. Main features include - auto power off to conserve battery; memorize maximum 1 minimum readings with recall facility; data hold; RS-232 computer interface; large LCD display with dual function display for convenient reading; and DC 1 OF selection through push button on front panel. Can be plugged with ORP probe, available optionally, to become a professional ORP meter. Comes in a lightweight, unbreakable ABS plastic casing.
See Enlarge
|
|
|
|
Click to Enlarge
|
pH METER, DIGITAL, PORTABLE (0370)
Specifications : Range - 0-14pH, Resolution -0.01pH, Impedence >1012 Ohms, Sensor - Combination pH Electrode, Temperature Probe, Accuracy - 0.01pH, Temp Comp. 0- 100?C (Auto), Display - 3.5 digit LCD, Battery - 9V DC.
See Enlarge
|
|
|
|
Click to Enlarge
|
pH METER, DIGITAL, BENCH STAND (0371)
A highly stable and accurate digital pH meter featuring rugged and reliable design providing accurate results over long time. Specifications Measuring Range - 0 to 14.00pH 10 to 1999.9mV, Resolution - 0.01pH/1mV, Accuracy - 0.01pH ? 1 digit / ?1mV, Display - 3 .5 digit, bright red LED display, Input Impedence 1012 Ohms, Slope Control - 80 to 120%, Reorder Output - 0 to 10 mV/pH; 0 to 10mV/100mV (adjustable), Power Input - 220V ? 10%. 50Hz AC.
pH METER, DIGITAL, BENCH STAND - with 0-100°C, with auto temperature compensation.
pH METER, DIGITAL, BENCH STAND - with 0-100°C, with manual temperature compensation.
See Enlarge
|
|
|
|
Click to Enlarge
|
pH METER, MICROPROCESSOR BASED (0372)
Main features include
· Microprocessor based technology
· Measures pH, mV and temperature
· Auto buffer recognition facility
· Storage for 90 samples Specifications
Measuring Range 0 to 14.00pH / 0 to 1999.9mV / 0 to 100°C, Resolution - 0.01 pH / 0.1 mV / 0.1°C, Accuracy - 0.01pH ± 1 digit / 0.1mV / 0.1°C, Temperature Compensation - 0 to 100°C (Auto / Manual), Auto Buffer Recognition - 4.00.7.00, and 9.20pH, Read Out - 16x2 lines, backlit alphanumeric LCD display, Storage -
up to 90 samples, Printer Interface - External Dot Matrix Printer with centronics Interface, Keyboard - 8 Keys, soft touch, membrane type, Power Input - 220V ± 10%. 50Hz AC.
See Enlarge
|
|
|
|
|
