| |
Click to Enlarge
|
TEST TUBE HOLDER, METAL WIRE - Steel Wire Flat Circular Collar (0748)
A simple test tube holder of stiff metal wire. accepts tubes up to 50mm diameter. Overall Length 130mm. Also available with Brass Wire and Steel Wire bent curved Collar.
See Enlarge
|
|
|
|
Click to Enlarge
|
TEST TUBE HOLDER, METAL WIRE - Steel Wire bent curved Collar (0749)
A simple test tube holder of stiff metal wire. accepts tubes up to 50mm diameter. Overall Length 130mm. Also available with Brass wire and Steel Wire Flat Circular Collar.
See Enlarge
|
|
|
|
Click to Enlarge
|
THERMOMETER HOLDER (0750)
A pair of spring steel strips, curved at one end to accommodate thermometers, are mounted in a metal system, which in turn is attached to a die-cast bosshead. Provided with winged nut to tighten the grip of curved jaws. The holder portion is detachable from the boss-head.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, A-SHAPED, SMALL (0751)
Cast iron base, heavy, with baked, chemical resistant, paint finish. The bridge between two support arms has threaded hole for 12. 5mm diameter rod at the center. Length of side about 160mm. Please specify separately, if threaded hole for 10mm rod is needed.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, A-SHAPED, BIG without Levelling Screws (0752)
Made of rugged cast iron for extra stability, comes with a baked, chemical resistant, paint finish. The bridge between two support arms has threaded hole for 12. 5mm diameter rod at the center. Length of side about 200mm. Also available with Levelling Screws. Please specify separately, if threaded hole for 10mm rod is needed.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, A-SHAPED, BIG with Levelling Screws (0753)
Made of rugged cast iron for extra stability, comes with a baked, chemical resistant, paint finish. The bridge between two support arms has threaded hole for 12. 5mm diameter rod at the center. Length of side about 200mm. Also available without Levelling Screws. Please specify separately, if threaded hole for 10mm rod is needed.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, A-SHAPED, HEAVY PATTERN (0754)
A bigger. heavier, A-shaped base of pressure die cast alloy metal has raised bridge between the two arms. The bridge has a vertical hole with a plated metal tightening screw for vertical mounting of rods up to 13mm diameter. the design permits the mounting of even unthreaded rods. Provided with leveling screws. Length of side about 200mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, RECTANGULAR, SHEET METAL (0755)
A simpler, stable and economical base made of die-pressed sheet metal with threaded hole for 12.5mm diameter rod at the center of one of the shorter sides. Sizes available are 160x100mm, 200x125mm & 250x160mm. Please specify separately, if threaded hole for 10mm rod is needed.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, RECTANGULAR, CHANNELED (0756)
Cast iron rectangular base with raised channel shape at its top, matte finished. One vertical wall of the channel has a plated clamping screw for tightly securing flat objects up to 13mm thickness. Base dimensions 10.5x8.5cm approx.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, RECTANGULAR, STEEL (0757)
Heavier, rectangular. stable, pressed sheet steel base finished matt black, hole for 12. 5mm diameter rod is located at the center of one of the shorter side. Sizes available are 150x100mm & 200x130mm. Please specify separately, if threaded hole for 10mm rod is needed.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, RECTANGULAR, PRESSED STEEL (0758)
Die-pressed, rectangular, steel base with threaded hole for 12.5mm diameter rod at the center of one of the shorter sides. Finished in blue. Base is recessed at the bottom with two shorter sides having rubber feet for added stability and preventing damage to the work?surface. Sizes available are 160x100mm, 200x125mm, 250x160mm & 315x200mm. Please specify separately, if threaded hole for 10mm rod is needed.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, TRIPOD HEAVY (0759)
A heavier, more stable, cast iron tripod base, finished matte black, having central raised portion with a circular hole to accept rods up to 12.5mm diameter. Provided with a plated metal, threaded thumb screw for securely clamping the rods.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, TRIPOD (0760)
Cast metal tripod base, well painted with stoving enamel, with a threaded hole at its center to take a rod of 12.5mm diameter. Sizes (length of the foot to the rod) available are 110mm, 135mm, 150mm & 175mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, TRIPOD, LARGE (0761)
A heavy, cast metal tripod base, with each leg having rectangular crosssection extending about 130mm from its center and a height of about 40mm. A triangular shaped hole with a threaded tightening knob provides firm grip on the mounted rods. Its shape, size and weight renders high degree of stability to the mounted objects. With non-skid rubber feet and scratch resistant epoxy coating.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND BASE, OCTAGONAL (0762)
A heavier, octagonal shaped base, die cast alloy metal, finished in matte. It has two T-shaped grooves for rapid attachment of self-locking rods at the desired position - centered, off-center or on various axes. The fixing system comprising T-grooves and diagonal brackets allows vertical rods to be positioned while assuring their positive attachment to the base.
See Enlarge
|
|
|
|
|
