| |
Click to Enlarge
|
RODS FOR RETORT STANDS (0763)
Metal rods with one end threaded with shoulder ensures straight vertical, upright fit on any of the bases given above. The rods have reduced diameter at threaded portion that enables rod to sit flat on support bases. All rods have rounded top and provided with a through hole just above the shoulder to permit insertion of tommy bar for tightening of rods to bases. Sizes (diameter x height) available are 10x500mm, 10x600mm, 10x750mm, 10x900mm, 10x1000mm, 12.5x500mm, 12.5x600mm, 12.5x750mm, 12.5x900mm & 12.5x1000mm in Aluminium, Mild Steel - Nickel Plated & Stainless Steel.
See Enlarge
|
|
|
|
Click to Enlarge
|
RETORT STAND WITH ROD, POLYPROPYLENE (0764)
The non-corrosive moulded Retort Stands provide excellent replacement of the metal ones. The base and the rod have no exposed metal parts to corrode. The metal rod has moulded polypropylene covering to make it noncorrosive, and acid / alkali resistant, with overall size about 12.5 x 750mm (diameter x height) and has threads at one end for screwing on top of retort base. The polypropylene thick, weighted, stable and smooth base has a deep thread at its top to take the rod. Base sizes available are 225x150mm with Side hole, 300x200mm with centre hole & 300x200mm with side hole.
See Enlarge
|
|
|
|
Click to Enlarge
|
DRAINING RACK, METAL WIRE (0765)
For general laboratory use. Made of thick metal wire that provides durability and ruggedness, completely covered with plastic layer to avoid any rusting of metal wire, ensuring longer life. Also provided with an arrangement for hanging on the wall.
See Enlarge
|
|
|
|
Click to Enlarge
|
DRAINING RACK. PLASTIC (0766)
The draining rack provides excellent assistance for post wash draining of tubes and bottles in the laboratory. The back plate has 20 holes into which pegs are securely mounted with the help of screw-nuts. Bottom of the rack has a tray for collecting the drained water seeping down from the draining objects, which can be further transferred to a container via drain tube. All plastic construction makes it non-corrosive, and non-staining.
See Enlarge
|
|
|
|
Click to Enlarge
|
PETRI DISHES RACK for 90mm Petri Dishes (0767)
These racks have clear acrylic construction with white polycarbonate posts and are very useful during inoculation, incubation and storage. Visibility from all sides enables the culture to be seen and checked during incubation. PETRI DISHES RACK for 90mm Petri Dishes Holds 60 Petri Dishes of 90mm diameter.
See Enlarge
|
|
|
|
Click to Enlarge
|
BURETTE STAND, WOODEN for Single Burette with base 200x100mm (0768)
Completely made of seasoned hardwood. well-polished with moulded plastic clamping screws. Rod size approx. 460x16mm
(height x diameter). Also available for double burette with base 290x110mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
BURETTE STAND, WOODEN for Double Burette with base 290x110mm (0769)
Completely made of seasoned hardwood. well-polished with moulded plastic clamping screws. Rod size approx. 460x16mm
(height x diameter). Also available for single burette with base 200x100mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
BURETTE & FUNNEL STAND (0770)
To hold one burette and one funnel simultaneously. Polished hard wood with cork lined jaws and moulded plastic screws. Base fitted with non-skid feet for stability. Overall height 490mm, base size 330 x 110mm.
See Enlarge
|
|
|
|
Click to Enlarge
|
STAND FOR DROPPING BOTTLES (0771)
Sturdy and durable, made of hardwood. with holes of about 45mm diameter for dropping bottles upto 60ml capacities. Available in configurations for 6 bottles and 12 bottles.
See Enlarge
|
|
|
|
Click to Enlarge
|
FUNNEL STAND, WOODEN - Single for 1 Funnel (0772)
Made of seasoned hardwood, well-polished, with clamping screw. Size of wooden rod is approx. 460x 16mm (height x diameter). Single base 200 x 110mm. Double base 290 x 110mm approx. Also available Double for 2 Funnels.
See Enlarge
|
|
|
|
Click to Enlarge
|
FUNNEL STAND, WOODEN - Double for 2 Funnels (0773)
Made of seasoned hardwood, well-polished, with clamping screw. Size of wooden rod is approx. 460x 16mm (height x diameter). Single base 200 x 110mm. Double base 290 x 110mm approx. Also available Single for 1 Funnel.
See Enlarge
|
|
|
|
Click to Enlarge
|
FLASK STAND. POLYPROPYLENE (0774)
Facilitates holding of round bottom flask. Has a stair-like top view, with every ribbed step providing excellent support to the round bottom flask at every point of contact. Can easily hold flasks up to 10L capacity. This stackable stand can also be steam autoclaved.
See Enlarge
|
|
|
|
Click to Enlarge
|
PIPETTE STAND, HORIZONTAL, WOODEN (0775)
Well polished hardwood, to hold 12 pipettes horizontally - 6 on each side. Approximate size 23 x 26 x 12cm (H x W x D).
See Enlarge
|
|
|
|
Click to Enlarge
|
PIPETTE STAND. VERTICAL. WOODEN (0776)
Well polished hardwood. to hold vertically 24 pipettes of assorted sizes in two horizontal wooden tiers with holes. Fitted with non-skid rubber feet. Approximate size 41 x 36 x 11 cm (H x W x D).
See Enlarge
|
|
|
|
Click to Enlarge
|
PIPETTE STAND, HORIZONTAL, POLYPROPYLENE (0777)
Completely detachable stand, moulded in polypropylene, is totally noncorrosive and unbreakable, and can hold a total of 12 pipettes, 6 on each side. This autoclavable stand has two sides attached to each other through three metallic rods coated with polypropylene.
See Enlarge
|
|
|
|
